Startup of new Toshiba 32in LCD TV

is the scart cable in correctly?
is it damaged?
maybe the scart input faulty?

Get a hdmi switch

It is repairable but at least consider there is a faster solution--if you have cable or sat for signal the set has rear connections other than the coax fitting that a cable or sat box will hook up to....there are ways to get around the cable fitting that is broken.

let me know if you have questions

Everything with a scart / AV output will work when there is a tuning system inside.
For example a DVD recorder or a videorecoder.
The best is a DVD recoder with HDMI connector because it;s a HD TV.

I solved the same problem by disabling SIMPLINK from OPTIONS menu. I own the LG TV myself. The LG TV comes SIMPLINK "ON" as default setting from the factory. Go to MEMU -> OPTIONS -> Turn SIMPLINK to "OFF". This should work....

For best result when using digi use the scart lead that should have come with the box ~ You should have at least 3 scart sockets on the back of your tv. any 1 will do - then all tv will run through the av channel that should come on auto. when digi box is turned on.

If the TV tuner has digital connection with HDMI, or th white red and yellow connectors for RCA cable, it will work with the new TV.

If the tuner has only coax round antenna-like connector, then it will not work with TV tuner.

Many new TV also do not have scart cable connector, but adapters Scart to RCA are available.

you can run it through a cable box or vcr that has a coax input and rca output.

If the LCD only has coax, it will never display a HD picture quality. However, the Comcast HD Box will still display a picture using the coax connection. So, you could watch any HD channel, but the picture quality will not be high definition.

If the new player you hooked up is causing the spit screen then you have to go into the set up menu in the DVD player and take it out of prograssive scan.. Its in the wrong fornmat for your TV set. good Luck PS please dont forget to rate this.