Toshiba Satellite P25-S5263 monitor problem

Hi,
Does the display show anything before you enter windows? If yes, then press the key to transfer video back to your original screen once you enter windows. It should be the function key "Fn" + F5 - F8. looks for the icon which shows a monitor or says "CRT/LCD".
If it doesn't show anything before you enter windows I'm afraid your screen needs to be replaced. Good luck.

It is better to give it for repair. But I would recommend using a USB keyboard externally. It is easier.Read more at www.fixpcfreeze.com

no, you have to change your video card

hello, those beeps you hear usually means some error, and it depends on how many beeps you hear and in which sequence. below you will find several BIOS vendors and their beep codes which help you detect the problem:
http://www.chem.pitt.edu/facilities/bios_beep_codes_list_v3.pdf

hope this help let me know if you need further assistance.
good luck,
regards,

Amar Sondhi

Try to download and install newest windows drivers for the wireless and check BIOS for wireless settings. Apart from that... stick to Linux? ; )

The screen is shot...here is the service manual for the laptop...

http://tim.id.au/laptops/toshiba/satellite%20p20-25.pdf

Here is the LCD replacement link...

http://www.irisvista.com/tech/laptops/ToshibaP25/satP25_LCD.htm

Re=install.

i guess your laptop's display chip is not working.
check it with the other one..

thanks

click here for the link

remove the cmos battery from the motherboard for 30 seconds.It works i just did it on the a105-s4547 model