Band selection an freq. doesnt align galaxy 33hml

set it on the band you wish to check and use the frequency counter

channel 19 on am is 27.185

if you have to ask you are not qualified to do it . Get a tech to do it so its done right.

Assuming you're talking about the Galaxy DX88HL, and assuming the mad has been done to reach the 11 meter band, you press the band button in, that put's you to the E-H banks, select the E/A bank which is high bank E. with the frequency counter on, it should read 26.965 for channel 1. If it reads 26.975, then your +10KHz switch is on, turn it off. you'll then be properly set for 26.965 (ch.1) - 27.405 (ch.40). You also have 5 "hidden" frequencies, these are at ch. 3, 7, 11, 15 and 19. To get to the "hidden" frequencies, go to any of the channels listed and turn on your 10KHz switch. Those frequencies are not attainable on radios that do not have a +10KHz switch or a clarifier capable of sliding that far over. To do repairs and for a full list of schematics, diagrams and so forth, I suggest this site, it has the most coverage of the Galaxy DX88HL as well as other galaxies that I've been able to find. http://www.cbtricks.com/radios/galaxy/dx88hl/index.htm .

the freq display can be different from the channel selector display. the crystal in the freqcounter maybe going out or just got out of alignment.... check it with a know accurate frequency counter to determine if its on fequency or not. 000 3174269649

There's a frequency band chart for CB radios at http://www.longcom.ie/cb_frequencies.aspx
I hope this is of help to you.

high band and D will give you channel 19 freq. 27.185.

Enter Galaxy DX33 HML manual (or user's manual) in your search bar, you should be able to pull up a pdf file on it. This is how I got my manual for my Galaxy 33DX HML radio.

If you have programming cables and SW you can program a freq. in the center of the band,in slimplex. Question, can you read this radio?