DO YOU HAVE INTEL D845WN MOTHERBOARD CIRCUIT DIAGRAM

go to intel download drivers support type in board then download ok

Hi, here you can read info and download drivers
for your mainboard:

http://www.intel.com/p/en_US/support/highlights/dsktpboards/d845wn

The pin layout look like this:



Connect: 1 and 3, 2 and 4, 5 and 7,6 and 8.
The 9 number is not in use.
Its also printed in on the mainboard with very small letters.

Hello, try this link solve your problem: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+845+Chipset+Family+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+D845WN
Just choose the relevant operating system and driver type.

here : http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+845+Chipset+Family+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+D845WN

CHANGE 512 MBRAM

Here is the original manual in .pdf that will help you. Have a great day.
ftp://download.intel.com/support/motherboards/desktop/D845hv/hvwn_English.pdf

u should visit intel website bro.

www.intel.com

Please check this Intel link that shows specifications for memory that can be used in the Intel D845WN motherboard.
http://www.intel.com/support/motherboards/desktop/d845wn/sb/cs-008941.htm#1

When upgrading or increasing memory. The DIMM's should be the same. The Intel D845WN board requires the memory to run at 3.3volt. If the memory you are adding is within the Intel spec's, than switch the two Dimm's. Insert only the new DIMM & check if the system hangs. If it does than it is possible the new memory it either not compatable or is defective. For more information about the D845WN board download the manual for you're Intel board. http://support.intel.com/support/motherboards/desktop/d845wn/sb/cs-008937.htm

Luck!
Mike

page 4 of this setup guide will help you find the front panel connectors.

ftp://download.intel.com/support/motherboards/desktop/d845wn/qrg.pdf

Here is your manuals:

http://support.intel.com/support/motherboards/desktop/D845WN/WN_manual.htm

search for markings on the motherboard. sometimes the are not near the pins at all. the pins may have a name like J22 or something.