CREDA OVEN FAN NOT WORKING OVEN BARELY HEATING

If the fan is working o/k, then the oven elemment has probably failed.
This is located at the rear of the oven compartment behind a removeable cover.
If the fan is not working, then it it could be the timer is on auto, and not on the manual setting. Check your user instructions.

Most likely it is a blown heat element, you could check it if you have a multimeter or continuity tester.

If you remove the inner rear panl of oven compartment, you will see the element.
If you can see removeable screws, then you can change the element from inside without the need to remove from housing.
If screws cannot be removed from inside, then you will have to remove the oven from housing.
Please leave feedback for my suggested solution.
Thankyou.

Hi.
Frpm the sympton's you list, I would say that the main oven element has failed, espsecially if the fan is working o/k.
The element is located at the rear of the oven compartment behind a removeable cover.
In addition to the grill elements in the top oven compartment, there is an additional base element which you can't see.
If you turn the top oven on, the base of the compartment should get hot, if it does not, then the base element has probably failed.
Hope this helps.

try to check the Fan oven elements

here there is good price in Amazon.co.uk

http://www.amazon.co.uk/exec/obidos/ASIN/B002BEAYH2/ref=ox_ya_oh_product

You need to determine if you are getting a mains feed to the fan motor, if not, then you need to trace the wires bcck to source and work from there,
If you are getting a 240 volt supply, then the new fan is faulty.
Hope this helps you.

try to see user manual

http://imagebank.indesitcompany.co.uk/brochures_online/pdf/Creda/Cooking/HBC161E.pdf

If fan is working o/k , then you need to replace the heater element.
This is located behind a removable panel at the rear of the oven compartment,
Undo screws and remove element .disconnect leads, be careful not to lose them inside, fit new element, fit cover back.
Plz rate this solution.
Tthanks, and merry exmas.

if fan inside oven starts but no heat, then the probability is that the element is open circuit and needs replacing

my creda cookers hob and top oven is working,but my fan oven is not heating up,the fan works though.