Memoery full how do you reset the parrot kit ck3100

Found this on the net, not sure if it works or not:

"Hard reset the CK 3100 by pressing all three buttons for two seconds and then pressing them a second time (warning initializes factory settings)
2. hard reset thisback to factory settings"

Straight copy paste out of fixya website

and the link to the source:
Parrot CK3100 Bluetooth car kit hard reset

you will need to do a software up-grade to erase the memory and re-pair your phone

download update from parrot website, select the correct language on update software then update the parrot via bluetooth on computor/laptop

regarding the memory full on the message:

Ck3000, you have to press the remote control both buttons red and green at the same time to delete the memory of the kit.

The ck3100, just go to settings -> paired device and check cause there is up to five phones already paired to the kit, select and delete.

settings, paired devices, delete. the parrot will only allow 5 paired devices.

try holding the 2 bottons in for 1 min to reset the kit, if this doesnt work it will have to be replaced

o yes

turn ignition on in car push and hold green and red buttons together fro 10 seconds, the kit will say memory erasing in progress, then please pair device, then pair phone..

delete all previous paired devices before trying new phone, memory will be full. Let us know phone make and model if this dont work.

Try deleting all paired device from the parrot and your phone, remove battery from you phone to reset it. Then follow below instructions from Parrot.
Pairing Devices: ** From your car kit:
** Select SETTINGS / ADVANCED SETTINGS / PAIR WITH PHONE / OTHER PHONES

* From the phone:
* Select MENU / SETTINGS / BLUETOOTH / MY DEVICES / SEARCH NEW DEVICE
* The phone will search for available devices
* Select CK3100 from the list of available devices and enter PIN code \"1234\"
* Phone and CK3100 are now paired. Wait for auto connection