How do i put back wheel on 2011 gio electric scooter

Electric scooter batteries can last anywhere from 1-3 years. For comparison's sake, a car battery lasts anywhere from 2-5 years

Hi CALL. UPS BATTERY CENTRE
TOLL FREE 1 (888) 755-7718
[email protected]
cheers

It appears that you may have battery issues. Check out the battery and replace if necessary.

remove the key for a few minutes then put it back in it should work unless there is another problem good luck........one more thing u can try put lever in freewheel take key out put lever in drive and put key back should b ok ...cheers

Not sure what you are saying ,but if you want to put pressure into a flat wheel and air wont go in./inflate.
Get a piece of nylon rope cut it slightly larger than the tyre,then tie a Knot joining the rope into a loop.
Put around the tyre and use a bar or screwdriver to twist the rope so the tyre presses onto the wheel rim,and inflate at same time.
works good for flat lawnmower ride ons etc.
i hope this is useful to you or someone.

HAW REMOVE SEATS OF CHEVROLET MALIBU 2011

take battery out and put it back in

Hi! I have 2 Gio Scooters. I looked and looked for a tube for my tire and couldn't find a place until I realized that if you go to Ebay online you can actually buy them through Sven the supplier who sells the Gio Scooters on Ebay. You can just buy them from him and pay through paypal. Make sure the valve is curved and not straight out or it's not the right one. He ships pretty fast too:) I hope this has helped. It took me awhile to get parts. He also will ship parts, he's out of Vancouver. So Good Luck:) Do you know anything about fuses for these bikes???? Grrrr....
TTYL.G

you probably have a stuck step on brake on the back wheels which will disable the unit

Luck

Deane

First your going to remove the deck.
Take off the chain tensioner
Next remove the motor and put the chain around the gear
Put the motor back on the scooter with the chain on
Then take the rear wheel off and put the chain into the gear.
Put the rear wheel back on along with the chain tensioner and deck
Your done!

Note: the reason why I say you have the remove the motor and wheel is the get the chain on. So you may only have to partial remove the motor or tires to get the chain on.