Hi i have a Rio 3 it won't move it beeps 7 times

Question edited for clarity.
Question moved from Computers.

Beep codes. Looks like a throttle issue.

https://www.google.com/search?q=7+flashes+and+beeps+on+a+Rio+4

Hi,

Please check your car for worn out solenoids, clutches and/or gears. Fixing these will fix your problem.

Thank you.

I have the same problem in mine.. But the beep is continous. Mine is a fortress 2000 AT. anybody knows what's the trouble on this one?

Three long beeps may signify a keyboard error, and 3 short may refer to memory error. These are best guesses, because MSI uses several BIOS manufactures. Test your RAM one chip at a time to help isolate bad dimm.

See my info request.

Move the freewheel levers back and forth so the chair does not move drive position

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

Okay, I just had this same problem with my 2009 Kia Rio and I did this. So not to down everyone's post on here -- everyone is correct -- by turning the steering wheel back and forth and turning the ignition key at the same time is a correct method. However, after talking to a Kia Serviceman, he told me you have to do it hard -- meaning turning it violently back and forth hard (madman style). In order to do this operation, I had my wife sit in the driver side and turn the key while I was on her left side grabbing the steering wheel and violent moving it back and forth like a madman, and after about 2mins of doing it the key turned over -- problem fixed. Do not worry about breaking anything; turning the steering wheel violently hard is a must -- this was told to me by a Kia service Rep. Remember -- have someone assist you; either turning the key or violently turning the steering wheel back and forth. Hope this works for you!!!!!

turn console onto standby and leave a min
then hold button in till it beeps 3 times and release
then do this again it will beep 3 times last one being double quick beep
a menu should appear
click on the one that says files this will restore your lens reader

Hi,
There can be problem with memory or your graphic card!
When you next time reboot pull out memory if beep then it's the problem with you graphic card!!!
good luck

This problem is due to the mix of registered and unregistered DIMMs. 64Mb and 128 Mb DIMM's are unregistered memory technology 256MB is registered memory technology. A mix of registered and unregistered memory prevents the server from completing startup, and results in an error beep sequence and a blank screen