Hi. i am looking for a user manual for telefunken ice maker tpim 450 please?

You probaly have one hy now. If not try the manufacturers website or manualsonline.com

I really have no idea what type of equipment this is, please clarify.

look for a stuck or otherwise malfunctioning water fill valve. one way to check, turn the machine off and see if the water is still running to fill it. start with that and let me know.

Hi Maureen,

Your sub-zero 650 should produce about 8 cubes every 2 hours. It sounds like the heater beneath the ice maker may be wearing out. Ice makers use a heating mechanism to warm the cubes in the mold and force them to easily eject. If the heater is failing in the back slot, it could cause the ice cube to get stuck. If this is the case, you usually need to replace the part or the entire ice maker.

It is also possible the mechanism isn't properly aligned. You could try adjusting it.

You can find two manual on FixYa here: http://www.fixya.com/support/p24667-sub_zero_650_o_bottom_freezer

Otherwise, I suggest contacting their customer service or a technician: http://www.subzero-wolf.com/contact-and-support/index.aspx

Best of Luck!

How do I only get cold water without making ice

look for some reason that the sump is loosing water. Sometimes particals get caught in the dump valve and keep it from seating. Also, the sump may not be filling all the way and it will make small cubes. Set float to it's lowest level and see if that may help

Subzero ice makers arent all cut and dry. You could have an intermittent issue with either the ice maker itself, or the solenoid valve. SZs also often utilize a door switch which prevents the ice maker from operating if the door or the basket which the ice bucket sits in are not closed or in the proper position. If you have had other what would seem minor problems, that you have lived with, they can inadvertently affect different things. Most sub zero ice makers you can start manually by rotating the ejector comb clockwise as you look at the front of the icemaker, when the icemaker completes its cycle, do you get water to the ice maker, and do you get enough water, usually 140-150 ccs. If the ice maker continues rotating on its own after your initial start up, and receives the proper amount of water, either you have a cooling problem, a door or something is not in the correct closed position, you have a bad switch, or the ice maker is bad. If you receive little or no water at end of cycle, you have a bad valve.

The cubes are hollow? Means not enough water coming in on the fill cycle to fill the metal ice tray (netal form, see solution #2). There should be an adjustment under the end cover, looks like a screw with a spring around it. Look inside the cover and see if the directions are there for adjusting it properly.

Hi

Thanks for using FixYa. You can download the user manual for GE Ice Cream Maker Model 106765 from the following link—

GE Ice Cream Maker Model 106765 User Manual

Please do rate the solution.

Thanks
Rylee

[email protected]