Sharp remote controller CRMC-A310JBEO Ihave new batteries when on button pressed timer light I unit comes on I need green light for normal operation..help pls

Try https://www.google.com

Git a generic one in biglots or walmart

I would try a new remote first, if that doesn't correct the problem you have an issue with the main circuit board in the AC unit.

Please foward a image of the remote control please. I'll explai

Yes, by pressing the power button on the unit. It is factory set to cool to 68 degrees and maintain that temperature. To access any other settings you must use the remote control. The part # for the remote is CRMC-A750JBEZ

my air-con remote control was out-of-order. How can I buy one in Hong Kong for replacement. My air-con model is SHARP CRMC A562... Thanks to acknowlege to my e-mail [email protected]

HOW TO RESET THE CONTRO

BUY A 100$ AC UNIT FROM WALL MART I DID P.S CHECK YOU FREON ITS HOT DUE TO COMPRESSION NO PROBLEM =]

On this unit if you do a fact reset it should fix this problem steps as follows. PS you might need 2 people

1- unplug unit from back of unit
2- on the key pad on the tv hold the input and vol dowm buttons
3- while holding the buttons plug the tv in, keep holding the buttons until the screen comes up.
4- once the screen is up there should be a white K in a blue or green box.
5- next, on the key pad on the tv press the channel and vol down buttons once.
6- a menu should pop up
7- using the sharp remote,locate the directional pad
8- press the down button once should bring you to a 2nd page
9- top should state FACT INIT press the right arrow once to turn on, next a series of back slashes come up.
10- screen goes green and says INIT Successful
11- unplug unit from back of tv wait 10 sec then plug back in. tv should turn on by itself. should be back to as new.


If you get to step 7 and the remote still does not work then you need to replace the ir sensor board (aka) LED unit per Sharp.


if needed here is the orignal part info DUNTKE868FM01 about $12.00+ tax

There are two AAA batteries hidden below the keypad under the sliding cover.
Gently prise off cover to real batteries, and replace them.