We have a a digitech model xc0346 and the wind and rain reading not working Any help

Question edited for clarity, two questions made into one.
Question moved from Digitech Music to Weather Station
Duplicate post deleted in Cars and Trucks. Refresh page to see your question published.

Help in the link. All of the weather stations are made by the same company.

https://www.google.com/search?q=calibrate+a+Digitech+rain+gauge

..

Who are you asking? Anyone reading this only has a vague idea of what you need. No specific APP is mentioned and in reality, your question should be directed at the maker of the APP, not on FixYa

90 inches of rain?

You can get it here:
http://www.jaycar.com.au/products_uploaded/XC0346%20Instruction%20Manual.pdf

To reset the rainfall Press Set 4 times so the rainfall amount is flashing. Change the rainfall indicator to Total, then hold down the set button for 3 seconds.

Remove the cover and check is a spider has built a web over the
tilt bucket. I have to clear mine ona regular basis.
If this is a proglem, spray the inside if the cover with a surfase spray.

To set station Hold SET key down for 3 secs. Press SET key to select setting in this sequence. 1. Time Zone 2. 12/24hr format 3.Manual time setting HR/Min. 4. Calendar setting y/mm/dd 5.Temp display C or F 6.Air pressure display hPa or inHg 7.Relative pressure setting from 919.0hPa-1080.0hPa 8 Pressure threshold (sensitivity)Default 2 9.Storm threshold Default 4 10.Wind speed reading km/h, mph etc 11 Rainfall display in mm or inch. Use the + and History keys to adjust values (History key is - ) When replacing batteries Fit outside unit ones first then fit inside unit ones in that sequence so it can interpret the security code.

Read your manuals for both pieces of gear carefully first. You only have one amp so you won't be able to take advantage of all the FX on the Digitech as a lot of them are designed for stereo. The Digitech manual shows guitar into the Digitech and output from the Digitech into input of any guitar amp. Since you have a Marshall and can already get some great sounds by running your guitar straight into the Marshalls input, you would probably be better off using your Digitech in the FX loop. Run a guitar cord out of the send on the loop into the input of the Digitech and a guitar cord out of the left / mono output jack on the Digitech into the effects return jack on the Marshall. Start out with the effects level on the Marshall all the way down. Do the same with the Digitech with both the input and output levels. (Read the manual carefully) I think the choice of the Digitech isn't that great because it is already trying to reproduce a lot of what you can already get with just your Marshall but with a little experimentation and some careful adjustments you should be able to add to the sound of the Marshall. Hope this helps.

We just got one for Christmas and can't get the wind speed to work either. And it can be pouring rain outside and it just shows cloudy.