My boombox wont work when I put batteries in. It works fine when its plugged in but when I tried to play it using the batteries nothing happen. Please help. Thanks

Same problem here. We had it for 1 week, replaced batteries 2x, held down green button for 10+ seconds and it is dead. Any help would be great!

Did you blow any fuses in your home? Or unplug it, plug it in causing a spark to go through the boombox?

Try these:

1. Can you plug something else besides your laptop into the outlet...verify you have power?

2. Is there a light on your AC adapter...when you plug it in?

3. Try removing your battery and plugging it in, and verify that your AC adapter is working (somehow, if it has no indicator light)

4. Then unplug it, put the battery back in and see if it will start.

Let us know what happens after you try these.

Ensure the key lock is not activated by sliding
"Power on/off ( )/Hold" towards the center
position. If your player isn’t already on, turn it on by
sliding "Power on/off ( )/Hold" to the left
and holding until the player turns on.

-Tha Mp3 Doctor

try a different power cord and plug it into a extension cord separate from the outlet you put your welder in. otherwise contact bosch thru website

Ok sound like the play head is out of a-line ment - easy way to fix if it is this - remove from the mains supply and open the cassette deck door - press the play button down and look at the play head there is 2 screws 1 either side 1 is fixed and 1 is sprung - now inset batterys (much safer) - try and fit a cassette in without using the cassette door should just fit in then press play and ajust the Right hand side scree with a small screwdriver (insulated) and ajust slightly to the left or to the right and this should fix the chewing - to get it just right use headphones ajusting left to right will tke the sound + & - to each earphone. Warning dont turn to far to the left as this will undo the screw completely - u have a least 1 whole turn either way is fine

The problem is "ipod dock receiver connector"(connector is fuck), move forward and backwards the ipod just point the ipod can play the songs..

try you!

The problem is "ipod dock receiver connector"(connector is fuck), move forward and backwards the ipod just point the ipod can play the songs..

try you!

try this link: http://ipod.about.com/od/troubleshootingyouripod/ht/reset_ipod_nano.htm

My older model PD6810 had the spindle that holds the CD on the player missing causing the ER message to show and the player to stop working.