A comment. Level 956 is far to hard. One game I did not have 1chance at 5second tile and the very next game I eliminated all of the available times and still was 110k points short.

When a Mahjong tile is discarder it's considered "dead" and cannot be used or picked up again unless you have a pair of the same kind and picking up the discarded tile allows you to open a "three of a kind" set. This is only if you already have two of that kind. If you do, you say "pong" and take the discarded tile to show your set.
You can't do it to create a "run", meaning three subsequential numbers of a same suit, unless you are the next one in turn to play.
Another exception is if you are calling for Mahjong, meaning using the last discarded tile to finish all the required sets that allow you to win, and declare Mahjong. Then you are allowed to call for the discarded tile.

sounds like you will have to remove the tile and shower pan. The pan needs to be level along all walls. Use a level. I had to cut wood shims to support the pan and keep it level before screwing it to the side walls

If you can find this product: (Or order it online)

Picture: http://www.sanishieldproducts.com/images/el-4.jpg To find a distributor: 800.528.3149
Shower Tub & Tile Cleaner

• CLEANS everyday scale, calcium, hard water spots, soap scum & body oils on showers, bathtubs, tile and sinks.
• EFFECTIVE on glass, fiberglass, clear plastics, ceramics, aluminum, stainless steel, brass, chrome, porcelain and cultured marble surfaces.
• UNIQUE biodegradable, cherry-scented chemistry. 32 fl. oz. size (950 ml)

ELIMINATE" TUB & TILE CLEANER 32 oz.

• Non-toxic, non-fuming non-abrasive, non-corrosive, non-flammable
• Biodegradable
• Removes soap scum, scale, hard water deposits and body oils
• Safe on plexiglass, plastic fiberglass, chrome, brass, gold, silver and ceramic

It is carried by Ace Hardware $6.49 ea

An awesome product that you spray on and let sit overnight. then simply wash it off. (Non Toxic / Non corrosive) No gloves required but does have an odd odor so I would let it soak outside. Heavy accumulations may require a second treatment.

Also great on shower heads. Remove it.. place it in a glass overnight and then re-install the next moring. Does not discolor anything. Ditto for shower enclosures and tile. Why this product is not in great demand is a mystery.

Link with picture: http://milo.com/32-oz-eliminate-shower-tub-and-tile-cleaner (out of stock!)

THIS WILL Clean it.

Kelly

I found these instructions at boardgamegeek.com...
This unique children's game spawned a whole line of Labyrinth Games. The board has a set of tiles fixed solidly onto it; the remaining tiles that make up the labyrinth slide in and out of the rows made on the board. There is always one tile not in the labyrinth. Players take turns taking this extra tile and sliding it into a row on the labyrinth, moving all the tiles and pushing one out the other side of the board, which becomes the piece for the next player to add to the maze.
Players move around the shifting tunnels of the labyrinth in a race to collect various treasures. Whoever collects all of their treasures first and returns to their home space wins!
This game is very simple at first glance and is an excellent puzzle-solving game for children; it can also be played among adults using more strategy and more of a cutthroat approach.

Open the game board and spread it out on a flat surface. Have each player draw seven letter tiles from the "kitty" or box of tiles. Once each player has drawn these tiles, flip a coin or think of some other way to decide who goes first.

Step 2 Try to use the letters that you have drawn to make the words that are on the Scrabble board. Scrabble Jr. does not have spaces for different words, as it is intended for those who are just learning how to read and spell.

Step 3 Make a word on the board, then add up the points on the letter tiles. Record each player's score on a piece of paper. When a player uses his tiles, he can grab new ones from the kitty.

Step 4 Return tiles for replacement ones. If a player does not use any tiles during their turn, they can replace them before relinquishing their turn to the next person.

Step 5 End the game when every word on the Scrabble board has matching tiles on it or the tiles in the kitty run out. Count up the points and declare the winner.

A weakness of all Sega manufactured Game Gears is a particular type of electronic component used in various parts of the internal circuitry; the SMD (surface mount) electrolytic capacitor. Many years ago these components were a common cause of camcorder faults. Now, as Game Gears getting to be 15+ years old, they are suffering from the "bad cap's" phenomenon too.
The symptoms of faulty capacitors include:

• LCD Screen only looks good when viewed at an unnatural angle (anything other than 90 degrees).
• Bright parts of the picture create 'ghost lines' in the dark parts.
• Screen looks washed out, dim, and lacking in contrast.
• Turns itself off (in extreme cases).
• Problems are alleviated when unit has warmed up a bit.

Further confirmation can be had by opening the unit and examining the board area around the capacitors. Faulty capacitors will often (but not always) leak their corrosive electrolyte onto the surrounding board. This is a clear, oily substance which can may attack the cap's legs and surrounding components, leaving a green corrosion behind.

If one is faulty, the rest won't be far behind. Replaced them all at once!
These capacitors are glued and soldered to the board. To remove one, carefully rock it from side to side with a small pair of pliers until to feel the glue break, then desolder each leg from the PCB. When they're off, take the opportunity to clean up any leaked electrolyte and corrosion. Metho (rubbing alcohol to the Yanks) is good for this.
There are two versions of the Game Gear, the main difference being the main board layout. The later model also combined it's two ASICs (custom chips) into a single IC. There are other board layouts out there, if you have a Game Gear whose capacitor collection doesn't match the table send me a list and I'll update the page. Here is a list of all electro capacitors on the main board.
Mainboard
ONE ASIC GG TWO ASIC GG VALUE C68
C43
C45
C55
C54
C48
C49
C1
C4
C14
C48
C11
C31
C49
C35
C45
C44
C38
C39
C1
C3
C14
C48
- 100μ 6.3V
22μ 6.3V
4.7μ 35V
0.47μ 50V
0.47μ 50V
68μ 6.3V
100μ 4V
33μ 6.3V
10μ 6.3V
10μ 6.3V
10μ 6.3V
10μ 6.3V

Audio Amplifier Board
DESIGNATOR VALUE C1
C2
C3
C5
C7 100μ 6.3V
100μ 6.3V
100μ 6.3V
47μ 4V
47μ 4V
Some things to consider when shopping for replacement capacitors:

• Replacements should have the same capacitance (in μF - micro farad) and the same or higher voltage rating.
• Standard RB/Radial (both legs poke out from the bottom) electrolytic capacitors are fine.
• Sub-miniature types are even better.
• If you cannot find the correct value then connect two small caps in parallel. Tolerance is typically +/- 20% so no need to be too precise. E.g. 47μ // 22μ in place of a 68μ value.

If you find the sound from the internal speaker to be missing or distorted then a faulty C7 (47μ) on the audio board is the likely cause. If there also distorted audio on from the headphone jack then you many need to replace all capacitors on the audio board.
Capacitors on the power supply board are generally reliable, not being of the surface mount type.

Players take turns to place two letter tiles from their hand of seven tiles. The tiles must cover matching letters on the board. They can be placed on the first letter of any unstarted word or on the next available letter of a word that's already been partially covered. If a player finishes a word, they get a counter (or a point). Whoever has the most counters(points) once all the words are complete, wins the game.

i have not seen a trim kit for this application.you may have to rework the corner with tile.chaulk is your best friend.