Need the blade retainer screw for the Rival model 1030-6 meat slicer

Try somewhere like this because all spares are discontinued.

https://www.meatslicersi.com/rival-meat-slicer-parts.html

Sometimes you can get the whole machine on eBay for $30

https://www.google.com/search?q=replacement+blade+for+a+Rival+food+slicer%2C+model+1030V%2F4

....

TRY contacting rival directly

There is a large spacer washer that fits behind the blade. You can see an exploded schematic in this link. DO NOT try to get the 'manual', from that site, it is malicious. You can view the schematic though

https://www.google.com/search?q=Rival+65301+parts

Rival has manuals, but not yours.

https://www.rivalproducts.com/instruction-manuals.html

Parts suppliers, although you can probably get washers are Home Depot.

https://www.google.com/search?q=Rival+65301+parts

..

I have these parts available as of 8/17/17, several recycled parts in stock. Contact [email protected] I also have blade washers and suction cup feet of recent manufacture.

New blades have been unavailable for years.
In most cases, I can have your Rival 1005 thru 1030 or 1101 blade professionally sharpened and returned to you for less than the cost of a used blade. mailto:[email protected]

I only know of one company that might still be stocking your needed part. Try ABTECPARTS by CLICKING HERE

Welcome..!!!!!

Rival changed methods of blade attachment over the years, even within the same model designation. If what you need is the one or both of the pieces illustrated below, I often have salvaged parts. Ask for Threaded Shaft or Thumb Nut (two styles, interchangeable) or both,
.

i too need a pin for this modle. has anyone solved this problem for that person?