20 Most Recent Rival Food Slicer Questions & Answers

Question edited to add the maker. Question mover from Food Processers to Rival Slicer. Limited spares available https://www.google.com/search?q=rival+ELECTR-O-MATIC+1101E-2+parts ..

If you need the grey plastic type, I can't help; but, if you need the metal type, I probably can. I normally stock recycled threaded shafts and thumb nuts for old Rival and Magic Hostess metal-framed (not folding plastic) slicers. I also have new rubbers suction cup feet and friction-reducing blade washers.

If you still have this problem, please provide details of the problem. Rival 1030 and 1101 series slicers had design changes over their run and several thickness mechanisms were used. Please describe; can you see the working parts or are they enclosed? Is the adjusting handle a crank like used on old-fashioned pencil sharpeners or more like those used on a manual can opener?

If you still need these parts, contact [email protected]. As of 11/25/14 I have both available - the parts are recycled, not new, but perfectly serviceable.

If you still need this blade, contact [email protected] as of 11/25/14 I have a recycled one in stock. Also have new suction cup feet, blade-washers and rubber motor dampers (where motor touches frame).

Welcome..!!!!!

Rival changed methods of blade attachment over the years, even within the same model designation. If what you need is the one or both of the pieces illustrated below, I often have salvaged parts. Ask for Threaded Shaft or Thumb Nut (two styles, interchangeable) or both, .

New blades have been unavailable for years.In most cases, I can have your Rival 1005 thru 1030 or 1101 blade professionally sharpened and returned to you for less than the cost of a used blade. mailto:[email protected]

Still available on eBay or by contacting direct. mailto:[email protected]

I'm a little late 8-(, but, if you still need one, I can provide a recycled one. I also have newly-made replacment rubber suction cup feet, friction-reducing blade washers (go between blade and blade head) and rubber bumpers (alll three varieties) that attache to the foot on the slicer motor to reduce noise. [email protected]