How to repair a digital picture frame

Your photo frame must have come with a USB cable. Plug the larger end of that cable into a USB port on your computer and the other end into the photo frame. Turn on the photo frame (your computer should already be on). A dialogue box will pop up. Select to continue. Open up Windows Explorer. Your photo frame will show up as a "Removable Disk". Still in the Windows Explorer, go to the directory on your computer where you have the pictures you want to transfer. Select the pictures, right click on them and select 'Copy' from the menu that pops up. Go back to the photo frame (the Removable Disk), right click on it and select 'Paste' from the menu.

Hello,

I would think sometimes it requires time to Charge the Battery before happy face on screen comes on...loL :). Try to plug in adapter cable, or power cable, and leave it plugged in for a bit. Then try again later :)

My didgital fram will not turn on. ADS-18H-4 0918G switching adapter does have a slowly pulsing green light. But will not turn on the picture frame. Where can I get a replacement or how do i get it to work

Is is a repair.

Pls. contact KODAK for a repair.
Unless the frame has been misused or in contact w. liquid your 1 year manufacters warranty should cover this issue

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Need the modle to help. Try going here.
http://www.dynexproducts.com/t-product_documentation.aspx

Dear remove the write protection on your disk to eliminate this message, you computer or fram memory is write protected. check the properties of those and remove if they are write protected. this is resolve your issue.

Good luck in correcting your problem.
Best regard

http://www.shopping.com/xPC-GeCube-Pandigital-8-Inch-Digital-Photo-Frame-with-2-Interchangeable-Frames

please try these troubleshooting steps:

1. Turn the frame off.
2. Unplug the power cable from the wall outlet.
3. Remove any memory card or flash disk from the frame.
4. Connect the power cable directly to a wall outlet.
5. Turn the frame on.
6. Use a paper clip to press the button inside the pinhole on the back of the frame.

If after trying the above steps and the frame still have the same problem, then we need
to send the frame in for a repair as per warranty guidelines.

Your frame will be repaired per warranty guidelines. A product is warranted for 1 year from the date-of-purchase. For an In-Warranty repair, a “Proof-of-Purchase” is required. If the repair center finds any customer induced damaged, the warranty will be voided and you will receive a notification from the repair center in such cases.

Process the repair at www.kodak.com/go/itg

I have an Optiumus digital photo fram and it won't turn on

Where do I go to have my picture fram serviced???? It has worked fine. Then it shut off and will not turn on again. I pulled the power cord and left it off for a couple of days and then plugged it back in. That had worked before and now does not.