Enter the menu,
Change Language set to American. It is under symbol sets. Also change code page to usa.
Menu Mode
1. Verify that paper and the ribbon are installed.
2. Power ON the
printer.
3. Press SELECT and place the printer OFF-LINE (SELECT will
not be lit).
4. Press QUIET to enter Menu Mode.
5. The line shown below will
print.
Printer Control Emulation Mode Epson LQ 6. Go to Step A to print the current menu.
Go to Step B to change the menu.
Step APress PRINT to print the current Menu.
Press EXIT to exit Menu Mode.
The printer will go ON-LINE. (SELECT will light.)
Step BPress GROUP to move through the groups of the Menu.
A line
prints, showing the Group.
Press ITEM to move through the items in a group.
A line prints, showing the Item.
Press SET to change the setting for an item.
A line prints, showing the Setting.
Press EXIT to exit Menu Mode.
The printer will go ON-LINE. (SELECT will light.)
×