See if you can unscrew the handle at the bottom, and slide it off the top bracket. Then you should be able to tighten the top screws and re-install the handle.
See pages 6 and 7 of the manual here:
http://shared.whirlpoolcorp.com/assets/p...
Please change the rating if this helps. Thanks.
×
361 views
Usually answered in minutes!
I can see no screws at the bottom of the handle. The handle does not seem to have a cap that can be lifted off to expose screws and there also appears to be no way to access any screws from the inside of the door.
The handle is still securely fastened at the bottom.
Thanks for your time and effort. I really appreciate it.
The handles are not the same although the manual seems appropriate in all other ways.
My handles and attached to the door at about 60" (top) and 15" (bottom) inches from the floor. The handel then sweeps down in a curve forming the grip between these 2 points.
I have examined the body of the handle and can see no place where parts of the handle slip off to provide access to the screws.
×