How dose the lg 32 " screen film go back together am not sure what order they where in can you tell me

You probably have a blown capacitor on the power circuit board. You Can tell this because the top of the capacitor will be swollen. You can get the model number of the board and probably order one online for around 50 or 60 bucks but if you're not skilled in electronics Is best to take it to a TV repair shop. Sun TV repair shops will charge you a cheaper price if you take the board out of the TV and take it to them that way. They will fix it and you will install the board and put the TV back together yourself. I hope this was helpful hit

Plug stick in and go to multi media mode and select from there.

poss mainboard issue

The packets usually have detergent and rinse aid together, built in. If you also have liquid rinse aid in the automatic dispenser, you are getting a double dose, and that is causing the film. Use standard dishwasher detergent until the automatic rinse aid dispenser is empty, or at least turn the pointer indicator (located by the rinse agent filler) to the lowest setting possible to help somewhat.

Try website like Remotes.com to buy an exact to the original remote for the replacement.Most remotes these day are totally seal,can't be open.Dose ur remote have screws on it back cover,take the battery out some time a screw there too.Take all the screws out,take the remote aparts.Clean PCB board and the plastics inner rubber film's with some Q tips dipping in with some rubbing alchahol.Clean the PCB board and inner rubber film for batter contact,might save the remote.If the main CPU processor is not dead.

hello,

carefully open the parts of the phone and dry it under the sun.

do not expose the screen to the sun.

after a while, couple it back together and the phone will be back in order again.

take care

Auth LG servicer. Chances are it's cheaper to replace the tv unless you can get your homeowner insurance to pay for it. Check Ebay you might find one that is dead but has a good panel. Easy to change if you have any mechanical ability. Lay it on it's front , take off the back . Unplug and unscrew thing and put it back together. No electrical adjustments.

This is the fix for the Main board repair :
Locate IC 32 small 8 pin surface mount near top of Main Board and remove. Short pin 2 to pin 5. (pin 5 through 8 are together and pin 2 and 4 are together)
You will need a good TV Tech to do this for you.

I need to order one can u tell me where you ordered it from?

Find out for your area who the authorized service rep is for LG. The dealer where you bought the set should be able to tell you that, or you can look in the instruction manual that came with the set. Call them and order the parts. Their service reps are supposed to also sell the spare parts.

Jerry G.