Hello I try electronic monitor Relisys TL 766-RE scheme, can you help? Thank you

See my tip here: http://www.fixya.com/support/r9352105-fix_colored_vertical_lines_lcd_display

try to open back cover and remove / insert all connector that you can found including ribbon wire check also soldered side for possible lost contact.

theinstall, The internal AC line to DC power supply will need to be investigated for bad solder joints and or bad aluminium "can" electrolytic filter capacitors. 12fixlouie

update your video drivers.

Try to lower your screen display resolution: you might have to do it under 'Safe Mode' (eg. reboot your computer in 'Safe' mode normally done using the F8 key during the initial boot sequence) as your screen display appears to be unstable/unreadable.

There is a button on the front which will take you in the Menue option there you can press the recall option.This will reset the monitor.
Good luck

you can try contacting Lumaco they are a British monitor repair specialist.
www.lumaco.co.uk

It might even be cheaper to buy a new one.

when u power up the computer press F* key then go to enable vga mode then set disaply resolutin incotrol panel to 800*600 or 1024 *768

Here is a definite solution to all those having problems with OCS menu on Relisys TL 766 Monitor.
Having tried many of the posted solutions none of which worked. The only option was to visit my local PC repair shop who disconnected the OCD monitor for UK £15.00. Spare parts for this model are no longer available. Only down side was the power indicator light in middle of now redundant control buttons does not work. Otherwise a monitor works perfectly. NO MORE STRESS.

Hi,I have same monitor and problem,still unable to resolve, I been told to try the monitor on other PC to see if the actual problem is in the monitor or originates from the PC.