I need help in good tension for rolled hem in empisal 606D overlocker

The only place

Instruction Manuals ' Empisal Sewing Machines

www.empisal.co.za > instruction-manuals
303E Empisal. Download Instruction Manual ... 5 Questions to Ask Yourself Before Buying Your First Sewing Machine. Comments Off on 5 Questions to Ask ...

Videos in this link on an overlocker rolled hem.

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk037gLFbNlNMqtXGv5AVKZtv5toN8A%3A1611162862583&ei=7mQIYLb_IsWz5NoP6eW86Ag&q=Empisal+Companion+Deluxe+400+roll+hem&

Page 41 of this Empisal Overlocker

https://creativenotions.co.za/files/Empisal-EOL4D-Overlocker-Manual-1.pdf

..

contact manufacturer or manuals on line.

I don't know your model in particular but generally this is how you set up a serger/overlocker to create a rolled hem. Remove the left hand needle and thread if 4 threads are threaded). Now there is usually a lever around the stitching area that you slide back towards you to remove the stitching finger back (disengaged). Then you adjust the top looper tension looser (about 2-3) and lower looper tension tighter (7 or 8). Leave needle tension at normal tension (5). You may need to move the cutting blade to the right too. The technique is to cut the fabric wider but with a narrow stitch so the cut edge rolls under within the stitching. You want the top looper thread really loose so it rolls right around underneath up against the needle thread, the lower looper thread needs to be tight and almost invisible, pulling the upper looper thread down. I usually do a few test runs and check the stitching. Once happy, I turn the stitch length right down to 1 so it is very dense. This uses a lot of thread up.

Ideally use a wooly overlock thread on the upper looper as this "fluffs" out once stitched and "fills" in covering the fabric edge completely.
some good images here
Sewing Basics Narrow Rolled Hems with Serger Sew Mama Sew Outstanding...

Talk to the store people where you purchased the machine, they can get you one.

Thats a 4 thread serger, you cant do a top stitch unless its a 5 thread

try checking with these sites and call or email them and ask them if they can help you
a1sewingmachines.com
sewvacdoctor.com

check with
sewvacdoctor.com
a1sewingmachine.com
you may need to contact these websites by email
also try youtube & ehow for video's

You can not do a rolled hem on heavier material. It is only for thin cloth. You have to do a 3 thread narrow edge on heavier cloth.

could someone please help me with a empisal overlocker 754D manual. Want to know how it works and how to get the tension right. Please help me