The default codes for things like that are usually the same for all products depending on the length of the code for e.g if it was 5 digits long try;
12345.....or 00000
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This worked for me, but I have a Comcast Motorola DVD-R: These are the codes for your SONY SA-CT60 Audio Device. Follow the instructions below to program your remote. Most likely code: 30158 Others to try: 31758, 31759
To program your Comcast remote:
Turn on the TV or other device that you would like to program.
Press the TV button on your remote control. NOTE: If you would like to program your remote control to work with a DVD Player,
VCR or Audio device press the AUX button.
Press and hold Setup until the red light blinks twice, then release Setup.
Enter the first code for your device listed above. If you perform this procedure
correctly, the red light will blink twice. NOTE: If you enter an invalid code, the red light will display one long blink and
exit the programming mode. Repeat steps 2 to 4 with a valid code.
Aim the remote control at your device and press Power once (press the Play key for
devices that don't have a POWER button). If the TV turns off, make sure that the
VOL+/- and Mute buttons also work. If so, you're all set!
If not, repeat these steps using the next manufacturer's code (you may need to try
several codes to find the one that works).
you have to be in stop mode i.e. in dvd/cd mode but stopped.you hold down the SD/HD button which is in the lower left area of the remote.after a few seconds the screen will go blank and then come back on and say 720p and you repeat the process and it'll say 1080i.hope that helps
switch from 1080i to either 420p or 720p (720p is actually better)
there is also a downloadable program from samsung.com
search for ht-x40 downloads 8. home theater HT-X40T/XAA Firmware this will upgrade the dvd player
×