Washing Machines Logo

Related Topics:

Jonas Hollins Posted on Apr 24, 2015
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

After replacing the front load gasket the machine will not fill with water or wash.It just sound as if it is going to wash.

1 Answer

tom cassidy

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

  • Washing Mach... Master 1,585 Answers
  • Posted on May 03, 2015
tom cassidy
Washing Mach... Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

Joined: Oct 25, 2014
Answers
1585
Questions
3
Helped
323125
Points
3520

Check water supplie

5 Related Answers

douglas smith

  • 1462 Answers
  • Posted on Mar 21, 2007

SOURCE: aeg washing machine

you may have blockage in pipe from drawer to tub but more likely the soap drawer is clogged. take it right out and clean thoroughly

Ad

Anonymous

  • 57 Answers
  • Posted on Feb 16, 2008

SOURCE: Frigidaire front load washing machine won't stop filling

it sounds like your water valve is bad or you pressure switch is bad or hose from pressure switch to tub is cloged

Anonymous

  • 188 Answers
  • Posted on Feb 19, 2009

SOURCE: Doesnot stop filling water

To javed_iqb904, does the drum actually fill or does it seem like that water is draining out as it's filling?


To neonllama19, if it fills with the tap on and the machine off, it sounds like a defective water valve. If it never stopped filling it sounds like a defective pressure switch or hose to the pressure switch is loose or diconnected.

Dissolu

Gintautas Maldzius

  • 221 Answers
  • Posted on Jul 25, 2009

SOURCE: Lg tromm front loading washing machine has

Yes the system is cloghed. Pull the detergent drawer out and clean the drawers housing. try using some bleach. It allways helps.

BE ADVICED: after using bleach run quick wash cycle on without any load, it's just to get rid of all bleech remains and not to damage your clothes

Update me about your progress

Anonymous

  • 6 Answers
  • Posted on Nov 10, 2009

SOURCE: How do I replace my door boot seal/door gasket on

There are 2 springs attaching the door boot. The springs are really tough but there are 2 separat tools for each spring. Use the tools to remove & install. It's tough but can be done.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

LG washing machine leaks when filling

You just need to find where from?

Back of the soap dispenser.
Water Level Sensor.
Hoses under the drum.
Drain Pump.
Drain Hose.
Door Gasket on a Front Loader.

Full 'make model top load / front load' is useful in these questions

https://www.google.com/search?q=LG+washing+machine+leaks+when+filling

..
0helpful
1answer

Whirlpool Cabrio washer will not fill with water?

LF is a long fill the machine control has not detected a change in the contact of the pressure switch which controls water fill and stop you didn't mention top load or front load, on a top load or front make sure you have water going to machine if you have flood safe hoses to machine replace then with regular washing machine hose the design of these hose will stop water flow, crazy as this may sound make sure the drain hose has not fallen onto the floor water fills and runs right back out, as a tech I have not had a pressure switch go bad usually on a front load the clip that holds the black hose in place pops loose allowing the hose to rub against the rotor which turns and rub a hose in it sorry to be long winded two simple checks make sure you have water to machine and that the black hose from the pressure switch to the tub does not have a hole in it
0helpful
1answer
1helpful
1answer

My Kenmore HE2 front load washer when I go to start a load of clothes it's making a humming sound and not filling up with water?

Either one of your water valves isn't working properly, or the lines have sediment restricting the volume of water . What I would do is turn the water to the machine off and remove the water lines and make sure they aren't filled will calcium, etc. and look in the water valves where the hoses connect because that are, which has a screen, may be full of nastiness. If both those are good then the water valve solenoid(s) are stuck and won't open. The humming sound you hear lets you know the rest of the machine is working because the sound is generated by power being applied to the valve by the control.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

1helpful
1answer
3helpful
1answer

Kenmore front-load washer stops at rinse cycle

When the washer initially fills for the wash, is it only hot water entering the drum? Try switching the water temperature between hot and cold as it fills. If any of them show little or no water getting through, it sounds too easy but check to make sure water supply taps are on, and that the cold/hot fill hoses aren't reversed. Remove the fill hoses and check any of the screen filters for blockage (in the hoses and in the inlet water valve). When the machine stops and waits to fill but all you hear is a hum, it sounds like there is power going to the valve but water is not able to get through it.
Good luck!

0helpful
1answer

Doesnot stop filling water

To javed_iqb904, does the drum actually fill or does it seem like that water is draining out as it's filling?


To neonllama19, if it fills with the tap on and the machine off, it sounds like a defective water valve. If it never stopped filling it sounds like a defective pressure switch or hose to the pressure switch is loose or diconnected.
0helpful
1answer

Water Remaining in Gasket Around Door

normal problem all front loads all brands.. leave door open as much as possible.. to clean fill tub with hot water pour in 2 cups chlorine bleach use rag in solution wipe gasket out as good as possible allow washer to run normal cycle ..do as routine when ever odor is first noticed leaving door open will allow most of water to evaporate
0helpful
1answer

Frigidaire front load washing machine won't stop filling

it sounds like your water valve is bad or you pressure switch is bad or hose from pressure switch to tub is cloged
Not finding what you are looking for?

52 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...