Treadmill stops in middle of workout - Proform Crosswalk 500 Treadmill

I'm sorry to hear that you're experiencing issues with your Kettler Pacer treadmill. The sudden stops, display turning off, and the energy-saving light being on could indicate a few possible problems. Here are a few things you can check and try to resolve the issue: 1. Power source: Make sure the treadmill is properly connected to a stable power source. Ensure that the power cord is securely plugged into an outlet and there are no loose connections. You can also try plugging the treadmill into a different outlet to rule out any electrical issues. 2. Safety key: Check if the safety key is properly inserted into the console. If the safety key is not fully inserted or is loose, it can cause the treadmill to stop abruptly. Make sure it is securely in place. 3. Overheating: Treadmills have built-in safety mechanisms to prevent overheating. If the motor or other components of the treadmill get too hot, it may shut off to protect itself. Check if the area around the treadmill is well-ventilated and free from any obstructions. Ensure that the cooling fans on the treadmill are working properly. If the treadmill is placed on a carpet, consider moving it to a hard surface to improve airflow. 4. Motor and belt: Inspect the motor and belt for any signs of wear or damage. A worn-out belt or a malfunctioning motor can cause the treadmill to stop suddenly. If you notice any issues, such as fraying or slipping of the belt, or strange noises coming from the motor, it may require professional servicing or replacement. If the above steps don't resolve the issue, it's recommended to contact the manufacturer's customer support or a professional technician who specializes in treadmill repairs. They will be able to provide specific troubleshooting steps or schedule a service visit if necessary. Remember to always prioritize your safety and follow the manufacturer's instructions when dealing with treadmill issues. I hope you're able to get your treadmill working smoothly again soon!

If you wish to get some details about treadmill ; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

please the video and proceed according. Of course lube the rollers bearing front and back.
God bless you

Does it show ant error numbers on the console?

When necessary to immobilize the treadmill, set display to read SELECT A WORKOUT. (Press the STOP Key
twice if not already there). Then hold down the SPEED DOWN Key and press the STOP Key. The treadmill
now displays IMMOBILIZED. In this state, the treadmill cannot be operated. The main motor and incline are
disabled. The treadmill will remain in this state across resets, power cycles, etc. To restore normal operation,
repeat the same key sequence: hold down the SPEED DOWN Key and press the STOP Key. The treadmill will
display SELECT A WORKOUT again.

When necessary to immobilize the treadmill, set display to read SELECT A WORKOUT. (Press the STOP Key
twice if not already there). Then hold down the SPEED DOWN Key and press the STOP Key. The treadmill
now displays IMMOBILIZED. In this state, the treadmill cannot be operated. The main motor and incline are
disabled. The treadmill will remain in this state across resets, power cycles, etc. To restore normal operation,
repeat the same key sequence: hold down the SPEED DOWN Key and press the STOP Key. The treadmill will
display SELECT A WORKOUT again.

Probably is getting overheated.... Also, I have seen some models that stop the workout when the belt is getting too worn out.... Perhaps you should look into replacing the belt. If the screen is losing power too, then it is definitely power failure (in which case, you should examine all the cords and connections.

Sounds like the BELT tensioner........

my nordic track 1000 stops several times during the workout. I can step to the side and the belt may or may not start back up. The display continues to display the set machine. any suggestions?