Double Trouble with Remote Codes

For a Cablevision cable Provider the remote controller Model Number is UR2-CBL-CV04 and its remote device unique codes for Roku TV become 031, 081. To get a Charter Cable Provider the remote control Model Number is usually UR4U-MDVR-CHD2 and its remote control codes for Roku TV be 11756, 11602. The user on find their respective remote controller code, have to activate their Roku account using enter Roku activate code to get started on streaming their recommended shows.
For a new Cox Communications Cable Provider the remote control Model Number is URC-8820-MOTO and its remote control codes for Roku TV be 1756, 2360. For the DirecTV Cable Provider the particular remote control Model Number will be RC65 and its remote control codes for Roku TV be 11756, 10818. For a Dish Network Cable provider the handheld remote control Model Number is 21.1 IR/UHF and its remote control codes for Roku TV be 535, 556.
The ONN Cable Supplier the remote control Type Number is ONA12AV058 in addition to its remote control rules for Roku TV are 3851, 3201. Once the consumers remote controller are programmed with the respective codes then the user also have to activate their Roku accounts using enter Roku activate code to start out enjoying their preferred streams.
Hope you find your own appropriate code for your cable providers. For any help on adding the RCA Roku TV codes call our technical support staff members through toll-free numbers +1-855-804-1313 or visit them at roku.com/link

download the manual for steps by steps from www. fitness.manualsonline.com or www. retrevo.com and fix it

God bless you

Hey Vernon Long,

We would have to program your remote to your RCA TV. I have provided the steps to program the remote below along with a few codes to try. You can view the link provided for more codes if the ones I list don't work!

Link: http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx

Codes: 502, 646, 633

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

Our remotes aren't guaranteed to work all types of equipment, but if the codes don't work let me know here and I will try some more steps with you!

Tommy Faust
DISH Network

Hello
Setup codes for RCA TV with RCA RCRN04GR remote control are:

11547, 11447, 10047, 10093, 10679, 11047, 11147, 11247,
11347, 11781, 11948, 11953, 12002, 12187, 12247, 12434
OK.

You can view ALL the documents (user manual, code list, etc.) here.There are numerous entries for GE appliances.

Good luck! Please rate my reply - thanks.

The codes for Samsung TVs are 0060, 0030, 0178, 0056.
If these don't work, you can download the user manual at http://www.oneforall.com/support/manual
for instructions on doing a manual search for your Samsung TV.
Please rate this solution. Thanks.

I have the manual for the RCA TV that the CRK59B came with. The Sylvania VCR program codes are 08, 29. If you're trying to control a Sylvania Cable -TV Box, the code is 11.

Codes For Model RCR311B
Code 1004 for Sanyo TV Code 1048 for Sanyo TV Code 1049 for Sanyo TV Code 1073 for Sanyo TV Code 1080 for Sanyo TV Code 1162 for Sanyo TV Code 1169 for Sanyo TV Code 1180 for Sanyo TV

Codes found here: http://remotefinder.rca.com/default.aspx?site=rca
RCR311B manual (PDF): http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr311-manual.zip&area=other

Try these codes for Quasar TVs:
1003, 1054, 1055, 1070, 1109, 1170

Codes can be found here.
http://remotefinder.rca.com/default.aspx?site=rca

The manual for the remote can be found here (as of 06/07/2009):
http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr311-manual.zip&area=other

Basically, try holding the TV button, the on/off button should light up. Then press the digits for the code one at a time. If the code is accepted, the on/off button should go off. Finally let go of the TV button. Now try operating your TV.

I can help. I too have an RCR312W remote and it did not work.
I found this code on bobvila.com message board. The code from the RCR311W remote works.


1) turn on unit

2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up

3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.

4) release both buttons. On/Off should stay on.

5) Press On/Off repeatedly until unit turns off.

6) Press the Stop key at bottom.

7) light goes off. Remote is programmed!