When I use my Motorola Bluetooth the person I'm speaking with gets a lot of noise

Hi Claybubby

A bit hard to diagnose from here... a lot of variables.

Is your iOS Up to date 8.1.3
Settings / General / About...

Next... quit all your Apps in Memory on your iPhone 4.
Then shut down...
D/Clik round button drag all small windows up to quit
Hold Round & Top Button down together for about 10 seconds
it will shut down
Press top 5 sec to restart.
Check bluetooth problem.

If still there ask someone in the genius bar at Apple store.
they have diagnostic utilities to assist..
Good Luck

Try resetting and repairing.

H730 Reset to Factory Setting

Mark
Motorola Support

Helen

You can reset by these directions.

TZ700 Configuring the TZ700

mark
motorola support

Sounds like you have a problem with your microphone.

Please contact us.

Mark
Motorola Support

CONTACT US

time for a new head set or phone

Try the headset that is compatible with you Motorola Q9h GSM phone.

Go to your phone carrier and exchange the phone out to one that doesn't have echo.

IT will give the noise because of the following reasons

• Due to signal distortion and also that you mieght be useing faulty bluethooth head set .
• It also occur due to low bettry chargeing
  

Things to do !

1. check your blue tooth head set with other Motorola cells
2. replace your blue tooth head set
   
3. clean the connector of the blue tooth cable
   

Please Rate !

bluetooth compaint , check this heAD SET IN ANATHER PHONE PROBLEM IS THERE OR NOT? OK PROBLEM IS THERE THEN COMPAINT OF HEADSET

Hi,

Check to see if you have not muted the headset or the phone.