SOURCE: THE SCOOTER MAKES A HIGH PITCH NOISE WHEN THE KEY IS TURNED ON
The buzzer is a piezo-electric device that is the "horn" for the scooter. It also will alert when the scooter is in reverse, if this option is programmed into the scooter. It receives its power from the PC board or console board which is located inside the top of the shroud at the tiller, where the thumb paddles that direct the scooter are located. If liquids have reached the board, or if condensation has affected the board, the circuit that controls the buzzer may have shorted causing it to come on constantly.
Opening the top of the shroud is fairly simple. Remove about 6 screws holding the clamshell cover together, remove the speed adjust knob, and it should come apart. Inside you'll see a PC (printed circuit) board, green in color with lots of small electronic parts embedded on it. The buzzer is also inside, usually about the size of a marshmallow and black in color with tiny holes to let the noise escape. There will be two wires leading from the buzzer to the plug-in at the PC board. Unplug the buzzer and the noise will stop, but you won't have use of the "horn" at all. Replacing the PC board can be done by a certified Pride tech, but it will probably cost you about $150.00 for parts and labor.
Hope this helps.
SOURCE: I have a 3 Wheel
Hello,visit:www.alldatasheet.com.Download as a PDF File-SHOPRIDER SERVICE MANUAL 2007 1-800-743-0772. This is 36 pages,being you have a scooter you only need pages 1 to 18.19 to 36 covers wheelchairs.Download it to your Adobe reader,save & print for future ref.And good news the site i gave you[alldatasheet.com] is free,The job you need to to is quite easy as you will see,a tip though,take pics with ur mob,just to be sure in case you forget how things are,hope this has helped,im disabled myself & know what its like not to be moblie MERRY XMAS Colin.
499 views
Usually answered in minutes!
×