Raymarine A65 Combo GPS Chartplotter/Fishfinder Logo

Related Topics:

Posted on Nov 06, 2007
Answered

Log and trip function not registering

I have a A65 chartplotter on which the log and trip function does not register.it is the second unit with the same problem all other functions work
how can I solve the problem?

Answer This Question

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
Governor:

An expert whose answer got voted for 20 times.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 16 Answers
  • Posted on Dec 28, 2007
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Governor:

An expert whose answer got voted for 20 times.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Dec 28, 2007
Answers
16
Questions
0
Helped
11928
Points
28

It is unlikely the problem is in the A65 screen.....most likely it is an issue with the paddlewheel itself, its circuit in the depth/speed transducer, or least likely, in the DSM25 sounder module.

Both the log and the trip functiions are read from the paddle-wheel sensor of the connected DSM25 sounder module and transducer.

1. Make sure you have a DSM25 sounder module and transducer with a paddle wheel (the A65 is available without the DSM25 option.)

Double check the connections between the DSM25 and the A65, as well as the transducer connection to the A65. There is an indicator light on the DSM25 to confirm it is on.

2. Make sure the paddle wheel turns freely. They tend to get fouled easily with debris and growth.

3. Make sure the A65 is giving to a reading for SPEED when underway or when having a buddy spin the paddlewheel by hand. Do not confuse SPEED with SOG. SPEED is from the paddlewheel.....SOG (Speed over ground) comes from your GPS sensor and is not used by A65 for log or trip purposes.

If you get npo speed reading at all the paddle wheel may be defective or the depth/speed transducer may be defective. See your dealer about a replacement.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

When i tun on my raymarine a65 ,i get gray and white lightly shaded vertical lines. what is the problem
Check cable connections, reseat all at both ends(so say the book) Now disconnect all cables, CAREFULLY open the housing, visually check internally.Perform as a surgeon would do, reseat all connections(flex cable,wiring,IC's,& the liquid crystal LCD display) clean as necessary with electronic spray cleaner & red eraser. Reassemble. Reconnect. Good Luck.(definition of 'reseat'- unplug or move unit in socket to reconnect the components leads)
Read full answer
Nov 02, 2015 • Raymarine A65 Chartplotter Fishfinder...
0helpful
1answer

Why does the casio qt6000 saying wrong operator
You are not logged in . Either you log in or you de-activate the clerk function
Read full answer
Nov 11, 2012 • Casio QT-6000 Cash Register
0helpful
1answer

TEC MA-1650 Cash Register It appears the register has been put into a sub programming mode somehow and we are unable to get register functional again. When Register is switched to Set there is a P...
Perform a status clear.
turn key to blind(must be S key not mgr key) while holding zero key down turn reg on with power switch on right side.
reg will beep once & print reciept saying status clear.
this wil not clear programs or totals.
Read full answer
Dec 12, 2010 • Office Equipment & Supplies
0helpful
1answer

MY RAYMARINE A65 CHART PLOTTER/ FISHFINDER HAS NOT BEEN WORKING , THE CHARTPLOTTER WORKS FINE , BUT THE FISH FINDER WONT PULL UP BOTTOM OR ANYTHING . I LOOKED AT THE LITTLE BOX THAT CONNECTS TO THE...
Likely your DSM25 (that little box that connects the transducer to the display) will need to be rebuilt. The red LED is saying that there is an internal fault with the unit. You would need to send the unit in for repair through Raymarine (as there really is not anyone else who can do it), and they would have to replace the main circuit card in the box. I believe that they are charging either $150 or $175 to repair those now... but likely the only way you will get that one to work again.
Read full answer
Jul 27, 2010 • Raymarine A65 Combo GPS...
0helpful
1answer

ON THE SCROLLING DISPALY IT DOES NOT SHOW SPPED OR TRIP DATA
Did you cancel the current trip and restart the GPS? Try one of your preset waypoints and see if you are getting data that way. It may just need a reset, unplug and allow it to discharge first and let's see if that does it.
Read full answer
Jun 02, 2010 • Raymarine A65 Combo GPS...
1helpful
1answer

Phone will not register with base
Would you try this procedure:-
-----------------
First on the base station..press and hold paging/register key for 3 seconds
Than on the hand unit select function key and open "MENU"
select "SETTING" from menu and confirm (Ok)
Selecect "HANDSET" and confirm
Than select" REGISTER" and confirm
than enter "0000" as pin and confirm..
it will flash and it detects the base.
-------------
Take care..

Read full answer
Nov 14, 2009 • Siemens Gigaset S440 Cordless Phone
0helpful
1answer

I have a model KX-TG9332T.... I cannot get the handsets to link with the base...I have unplugged, moved the system, changed the batteries and both handsets continue to get the message cannot link to the...
Registering a unit Operating additional
handsets
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L See page 6 for information on the
available model.
Registering a handset to a
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, register the handset.
1
Handset:
{MENU} i {#}{1}{3}{0}
2
Base unit:
Press and hold {LOCATOR} for 4
seconds until the registration tone
sounds.
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step should be
completed within 90 seconds.
3
Handset:
Press {OK}, then wait until a long
beep sounds.
4
{OFF}
Note:
L While registering, "Base
registering" is displayed on all
registered handsets.
L When you purchase an additional
handset, refer to the additional
handset's installation manual for
registration.
Read full answer
Jan 18, 2018 • Panasonic Lands Phones
1helpful
1answer

Hello! Our Raymarine A65 will not start up. It starts a boot process but does not show "Raymarine A65" on the display and no chart is displayed as it usually does. Regards Odd
Probably a bad printed circuit board, just had to send mine in to have it repaired. When I hit the power button, I did hear a beep, but then nothing displayed. Mine was still under warrenty, so don't know the repair cost if yours is not.
Read full answer
Jul 15, 2009 • Raymarine A65 Combo GPS...
0helpful
1answer

No depth reading while on plane.
Depending on your transducer type, you may have a liquid filled type that simply needs refilling. If this is the case check for leaks and get it redone. If not it could be transducer placement or cavitation under the hull.
Read full answer
Jun 18, 2008 • Raymarine A65 Combo GPS...
1helpful
1answer

RAYMARINE A65 COMPLETE FAILURE
Was the engine running when it shut off? How was the voltage at the time it failed? The A65 will shut down if the voltage drops below 11.2 volts.

Another common cause would be corrosion on the plug where it plugs into the back of the display, or the terminal connectors that attach it to the boat's power supply.

It could also be a bad crimp on the terminal connectors. Make sure connectors are the right size for the wire and that they are marine grade, such as Ancor brand connectors. I also recommend heat shrink style connectors,

I have not heard of any software issues for that model so I am betting it's a wiring issue. However, there is an update available from Raymarine. There were changes made to the WAAS satellites and the update helps it recognize the new satellites. You can download it for free from Raymarine. Copy it onto a blank CF card and plug it into the card slot on your GPS. When you turn the unit on it will prompt you on how to proceed with the update. It will fix any known software gliches at the same time.

I hope this answer helps. Please reply if you have any questions about my response.
Read full answer
Feb 25, 2008 • Raymarine A65 Combo GPS...
Not finding what you are looking for?

View Most Popular

A65 Combo GPS Chartplotter/Fishfinder

  • GPS

Related Question

When i tun on my raymarine a65 ,i get gray and white lightly shaded vertical lines. what is the problem

  • Raymarine A65 Chartplotter Fishfinder Combo

Related Topics

310 views

Ask a Question

Usually answered in minutes!

Popular Questions

Raymarine e-80 chart plotter keeps rebooting

Raymarine C80 GPS Receiver

St60 wind instrument

Raymarine ST60 A22012-P GPS Receiver

Wiring of seatalk instruments

Raymarine RL70CRC GPS Receiver

Can I enter waypoints by Lat & Long numbers on my

Raymarine GPS

Raytheon rl70

Raymarine RL70CRC GPS Receiver

Top Raymarine GPS Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Alexander

Level 2 Expert

171 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Raymarine GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...