Universal remote codes for shaw direct tv - Motorola Mobility DRC800 Universal Remote Control

Codes, if any, are available from the manufacturer of your remote.

Take your Shaw remote control, and follow the instructions on the back. If that does not work, telephone Shaw, and ask for technical support for TV.

Take your Shaw remote control.
Follow the directions on the back, to "program" it to interact with your TV/DVD.
If this does not work, telephone Shaw and get free technical support.

Take your Shaw remote control, and follow the instructions on the back. If that does not work, telephone Shaw, and ask for technical support for TV.

Take your Shaw remote control, and follow the instructions on the back. If that does not work, telephone Shaw, and ask for technical support for TV.
Once it is setup, press the TV button on the Shaw remote control, and press the MENU button. That should show the TV's "setup" menu.

Just bought a Dynex 26 inch and the code I found to work for my Shaw direct remote was 10463.

If your Shaw cable remote is universal, you will need to find the codes to program the remote to work with your Daytek TV. If it is not, you need to purchase one (usually @ $10) and program both devices to function with the new one. I hope this helps and good luck.

just looke for the anual on line check the brand web page first but i think for those tvs you have to program it ussing it as if u dont have a code

I was having the same problem but I finally got my universal remote to locate a code 1548

try that ? worked for me
Thanks
Tammy

I have an Acer 3720A and Shaw's Atlas PVR remote. I used the "scan feature" to find that code "0704" worked for me (at least for power and volume - which are all I need).

Whether or not this works for you depends on the specific Acer TV you have and possibly the model of "shaw" remote. Many Shaw remotes actually come from Universal Electronics (www.urcsupport.com) and they do not have Acer TV's in their DB. Acer's own site indicates they cannot provide a specific code (at least for my model of TV) and to try the remote's scan feature - which is how I ended up with my solution.

Hope this helps.