Nu Mark Numark Cdx Table Top CD Player CD Player Logo

Related Topics:

A
Anonymous Posted on May 02, 2014

My cdx this with all the lights and not answer any command

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

All lights are on but dosent get a reading in glass until i tap the bottom of it ?

i solved the all lights on problem by replugging 2 cables into the cdx. it's the 2 integrated 3 pin circuit for cdx power, they are not soldred but just plugged in. look the picture for detailles.8_31_2012_5_52_57_am.jpg
0helpful
1answer

How too conect numark cdx turntable to numark dm 1002mkII

All you have to do is to connect the 2 RCA audio line out from the CDX at any pair of the 4 line inputs (RCA too) at the 1200mk2. Keep in mind: Don't connect the CDX out at the PHONO inputs of the mixer.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114
0helpful
1answer

I have lost my book that tells me how to retreive my messages. My light blinks constantly telling me there are messages. I know my code but not what to do to get started so I can put my code in. Thank you

HI
ollow the steps:-

Remote access away from home:

You can operate your answering system from a remote location using any touchtone telephone.
1) Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about 10 rings and sounds a series of beeps.
2) During the greeting message (or a series of beeps when the answering system is off), press 0 and enter your PIN code within 2 seconds.
3) The answering system announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero." You will hear a beep.
4) Enter a command within 15 seconds, each command there after must be entered within 2 seconds

You may select a command from the following chart:

8f4e5ac.jpg
5) After the command has finished, you hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this
time from the chart above.

6)When you are finished, hang up to exit the system. The answering systemautomatically returns to standby.

Thanx



0helpful
1answer
0helpful
1answer

How do i change the clock?

Look on page 4 to set the clock on your Sony CDX-F605X. Do you have your card remote commander?
http://www.docs.sony.com/release/CDX-F605X_Owners_Manual.pdf
0helpful
1answer

Sony CDX-M630 instruction manual needed.

Hi

Here is a link to the operating manual and some other documentation relating to your stereo

http://www.usersmanualguide.com/sony/car_audio/cdx-m630

Hope this helps. Please do rate this answer. Many Thanks.
1helpful
1answer

Sony CDX-4000R car audio

One of my sons (40+ yrs) found the answer on the net which was yes it does, and e-mailed me. Incidentally the unit was a Sony CDX-4000R and not a Panasonic etc.
0helpful
1answer

Sony cd changer cdx-646...no card remote commander to release security code

Hi the CDX-646 is not coded. it must be your head unit thats coded.what model is the head unit?

you can get your code @ www.carradiocode.co.uk
for 33.50 if its one of the models listed you will nedd the remote comander tho.


Mark
www.blueice-electronics.co.uk
Not finding what you are looking for?

98 views

Ask a Question

Usually answered in minutes!

Top Nu Mark Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Nu Mark Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...