Factory reset Looking to do a factory reset as I am sure the previous owner has set some settings to their liking. Also my Aquos Net is all of a sudden asking for a password.

Previous 'owner' might not have been the real owner. If it is asking for a password, then someone set it up.

Looking at the manual, the fx32 is unsecured until someone selects a password, so you'll have to ask the previous owner, or try some obvious defaults like 1234.

Try peavey.com - someone else asked this question and got sent an email.

Resetting the Printer to Factory Default

Settings

Resetting the printer to factory default settings can be useful when

you are troubleshooting with the printer.

CAUTION Resetting factory defaults clears the page buffer, removes downloaded

fonts and macros, and returns all print menu settings to factory defaults.

To reset the printer to factory default settings

1 Press MENU until RESETS MENU displays.

2 Press ITEM until RESTORE FACTORY SETTINGS displays.

3 Press SELECT until the following message appears:

RESTORING

FACTORY SETTINGS

This message displays until the printer has completed the
initialization

Turn on laptop
Press F2
Enter BIOS
Select set factory defaults
If what you are asking is to pretend like you just bought the laptop and it has no protections from the previous owner, then take your OS cd and format and reinstall the OS.

Press and hold power button and your "n" home button almost simultaneously (Power first and the "n" )
Hold these until your screen flashes the "Touch the future of Reading" message, wait 2 seconds and release buttons.
You will then get a Prompt asking you if you want to reset it to the Factory Settings. Good Luck.

Did you look online or do you have a owners manuel? There is usually a factory set password such as 1-2-3-4 etc, unless you purchased it second hand and the previous owner custom set - then you have to contact the previous owner or Kenwood. Most people dont change the factory passwords. TRY KCAR (5227 ON A KEYPAD) uf that doesnt work read the forum post on: ecoustic.com. Good Luck

Since you bought the device used, it's likely the previous owner did not clear the passwords and data. Short of tracking down the previous owner, there is no way to unlock the unit without doing a factory reset. Here's a guide to reset the Garmin GPS units to their original factory settings.
http://www.mydigitallife.info/2009/06/09/how-to-reset-garmin-nuvi-gps-device-access-maintenance-mode/

Try a different AC cord first the one you have may a resistance problem. Also try plugging it into a different wall outlet. If still the same problem, somehow your convergence circuit has a fault.

But see if another ac cord works for you first...

get back to me on this when you have time.....
[email protected]

Well the easiest way to start with a clean device is to perform a "Hard Reset".. This resets the phone back to the way it was when it came from the factory. It restores the Operating System BUT it deletes all the info YOU and the previous owner have put on. So before doing a hard reset move anything you want saved onto your PC. If there is nothing vital then go to:

Start>Settings>System(tab)> and click on clear storage.

All previous wifi and network settings will be removed. (All customisation and programs installed by you or the previous owner will also be removed)

If you need assistance in inputting the new settings then I suggest joining a support forum like www.xda-developers.com or Modaco etc.

Your HTC is also known as the Mogul or the Titan so on the forums it may be listed under these names.

Mike