GE Clothes dryer squeaks

All ge dryers have a center bearing on the back side of the drum and drum glides on the frontside. The glides make a scrubbing sound when bad and the drum is hard to turn. The rear bearing does a squeak thang when the plastic bearing wears thin and begins to make metal to metal contact between drum mount and rear bulkhead mount. It is an easy fix but the drum gotta come out. here is my pictorial page that shows how with videos and repair pix:
Paw Paws GE dryer repair page

http://appliancejunk.blogspot.com/2011/09/late-model-hotpoint-dryer.html

http://appliancejunk.blogspot.com/2011/08/hotpoint-dryer-eating-clothes.html

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Here's a great guide for your needs.

http://www.appliancerepair.net/clothes-dryer-repair-5.html
Has all the info plus pictures

It could be the drum bearing.You prob need to re-grease it.but it could be a devil to get at.

drum rollers/glides, may be that the motor needs to be oiled, in which case you will need to unplug dryer and drill a hole in the casing not to deep just to where it goes through the casing, then moisten the cotton fabric. Hope this helps Tim:

http://www.partselect.com/dryer+dryer-tears-clothes+repair.htm

Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

ghgh

this is a frigidaire made dryer with kenmores name on it. The drum bearing needs more grease. You really need to know what your doing before you take that job on yourself. Its easy for me...but I have been doing it for 20 years and thats the way I role

Hi,
Might be the issue with the rotor bearings.
2.Might be there is some dust or other thing in rotor drum so please check and clean.

please replace felt around drum thank you for useing fixya RATE ME

UNEVEN LOAD

Check your email