Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White Logo
L
Lora McKee Posted on Mar 17, 2014
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Oven is stuck in lock mode - Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White

1 Answer

  • Official Brand Answer 4,342 Answers
  • Posted on Mar 18, 2014
Electrolux
Official Brand Answer
Level 0:

Joined: Mar 24, 2011
Answers
4342
Questions
0
Helped
1467957
Points
5907

Hi Lora, this is AP!

Based on the description of the Frigidaire electric range provided it appears the door lock feature has been activated. In order to cancel the Oven Lockout feature, press clear off and hold for 3 seconds. The control will unlock the oven door and resume normal operation.

This door lock feature is activated by pressing clear off and holding for 3 seconds. "Loc" will appear in the display, the "Door Locked" indicator light will flash and the motor driven door lock will begin to close automatically. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the display. If any control pad is pressed with the oven lockout feature active, "Loc" will appear in the display until the control pad is released.

This information is also located in the owner's manual should you like to view it again, you may retrieve a manual using your model# and the following link http://www.frigidaire.com/Owner-Center/Product-Support-Manuals/.

I hope this information helps to some degree - thanks for your question, and please do not hesitate to reconnect.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Used self cleaning process on my oven yesterday and today the oven will not turn on, we keep getting message to unlock the oven door even though it is. What can we do?

The oven gets extremely hot during the self-cleaning mode... the door switch might have got stuck in locked position, or broken in locked position (to be replaced), let's hope it's just stuck...which you'll need to work the mechanical lock-unlock latching back and forth to hopefully unstick....and if that doesn't work just re-run self-cleaning process but this time let the oven cool completely before unlocking the door. Hope this helps.
May 11, 2014 • GE Ovens
0helpful
3answers

Frigidaire stuck in DR mode

Good Morning ShawnR, thank you for your post!

An error code DR commonly refers to a door lock malfunction. I understand you have reprogrammed the range by unplugging it. It is important to wait approximately ten minutes and then turn your range back on. Typically, this will clear most false error codes. If the error code continues to display, your range could possibly have a faulty door latch, light switch or EOC (electronic oven control). I am fairly confident that an authorized service agent will be able to restore your appliance to its normal operating condition. You can often locate a qualified service technician on the manufacturer website.

Thanks for allowing me the opportunity to assist you!
0helpful
1answer

When trying the clean mode on the oven, it locked up, did not clean, and is not stuck in lock mode. How do I reset it? Turning off curcuit breaker did not help.

Hi Jim, thank you for your post! Once you have the flipped the circuit breaker it is important to wait roughly ten to fifteen minutes. If resetting the power does not correct the issue, you range could be experiencing a communication error with the EOC (electronic oven control), faulty door lock assembly, or could have wiring failure. In that case, a certified technician would generally replace the faulty part after proper diagnosis.
0helpful
1answer

Westinghouse oven door locked

if you mean it is in stuck in the clean mode , then try starting the clean mode again then hit cancel , let me know how you make out
Dec 10, 2011 • Ovens
0helpful
1answer

Aeg b5741-14 oven has code f5 -what does this mean?

Here is a list of oven error codes for your model Kenmore oven.
  1. F0 indicates a Stuck key pad.
  2. F1 and F7 may mean relay is turned on.
  3. F2 indicates that the oven is over temperature in one of the following modes within either cooking or cleaning mode of operation. The control is sensing over 615 degrees with the door lock circuit in the unlock mode. Control senses oven temperature above 915 degrees with the door in the locked mode.
  4. F3 and F4 indicates an open or shorted oven sensor or sensor circuit.
  5. F5 indicates a loss of relay drive circuit.
  6. FF indicates a loss of door motor safety switch.
  7. FC indicates a door lock circuit problem.
If the display of your control is flashing "F" followed by a number or letter its a range malfunction. Press the clear/off pad. Let the range cool for 1 hour and place the range back into operation.
If the problem repeats, call for service.
0helpful
1answer

Gaggenau EB944-110 Pyrolytic oven stuck in some kind of mode after power outage. Oven worked perfectly but there was a mains cut. After restoring power it appears to be stuck in some kind of strange...

Yes this could be the problem. If you can't set the timer to manual mode the oven will not work. Turn the oven to on so that when power goes to it you will see the oven indicator light come on. Play with the timer buttons until the oven indicator light comes on. If it won't work you probably need a new timer.
Feb 11, 2011 • Ovens
6helpful
1answer

Readout is stuck on 5Ab. Can't do anything with it

Hi.

I am publishing this tip because of the many users asking me about the code 5AB on Amana, Maytag and other ovens.

Error 5AB in fact does not exist , and what you see written on display isnot 5AB.

The beeping sound is a warning because the oven is in lock condition. The oven is not faulty, and the code is not 5AB, but SAB.

SAB means that the oven is in Sabbath mode, and the control board will be locked for 72 hours with SAB on display.

If power is disconnected a new 72 hours cycle will start.

Depending on the model, there may also be a beeping sound when you try to operate the oven.

Push and hold the Clock button for about 10 seconds, until the display clears, that will reset SAB mode.

If that does not work leave the oven connected and off for 72 hours. If the oven does not unlock after three days, then the electronic control may be stuck in SAB mode because it is faulty, in that case contact the manufacturer at the number listed on the owners manual.

Regards.

0helpful
2answers

Remove beko oven door

You have to look under the door seal and you will find the screws you have to remove to get at the hinges screws
May 19, 2009 • Ovens
0helpful
1answer

Lock won't disengage

Try putting it into CLEAN MODE and wait about 3 minutes.... then cancel the clean mode. Sometimes this will release the relay if its stuck.
If that doesn't work, you have a problem with the latch relay and you need service on the unit. You can try and remove the latch assembly yourself, but it can be tricky, and you may create more problems than you fix.
Jul 19, 2008 • Ovens
0helpful
1answer

Oven door open

Turn the operating mode dial to self-clean, then manually hold in for about 20 seconds the light pin on the oven rim. The lock will eventually open after 20 or so seconds. Turn off the operating dial and the door will close.
Jan 12, 2008 • Ovens
Not finding what you are looking for?

603 views

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Carew

Level 3 Expert

3808 Answers

Kell Le

Level 1 Expert

6 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...