OS on RAID is corrupt

not told at all what you have.
a PC of some kind running some kind of windows PC OS or windows server not told. what.
no RAID card told.
or what RAID chip is there or MOBO used,
I this hardware RAID or software RAID
RAID mode not told, RAID 0,1,...5, 6, 10 ?? what
how may SATa drives in the ARRAY set?
what size HDD in the set (over 2TB?) each.

install w10 was told but most old PC DO NOT SUPPORT W10 at all. No PC told yet not one clue.

"nvlddmkm.sys"
this is a failing windows NVIDIA VIDEO CARD DRIVER. no video chip told or video card told.

was this PC window 7 before and are attempting w10 install.
did you buy this secret PC form others and now it fails trying to put on w10>>

best it put a SSD in this PC,if PC secret is not too old
and install w10 to the SSD and not the RAID
then when W10 is running good rebuild the RAID, last.
then if RAID fails the SSD keeps booting and RAID is vastly more easy to maintain.

NO PC told and help beyond this point is going to be weak.
need to know all hardware there. PC and all cards inside, or help will be weak or generic. ,like mine

your post makes sense to me.
the conflict of server then workstations.
no purpose at stated for this workstation, nor why you need graphics beyond simple.
No list of purpose or applications that need this powerful motherboard (besides bragging rights?)
Distro;s ?
you do know that all OS can serve files right?
file sharing they all do it!
I guess because the mobo is a tagged server , you think it is, but is not, the WHOLE system is what makes a real server not just the mobo.

why would you need 2 CPU>? what application can you name that will need that, for sure not serving files to 100s of users online.
What a real hardware server can do better is do that with 100s of users or more.
So is just 2 CPU workstation....

I'm not sure what piddly games are?
just Solitaire. or COD infinite warfare.?
Linux games? which ones? Join a real Linux forum?

Q1:
1: power budget, is simple.(addition math watts is it)
the motherboard (not spec but the manual says)
all HDD. (figure 30 watts to start it and 12w to run)each.
All AMD Opteron 4133 both total max at peak. 95watts
no memory stated, 2 sticks or 8 sticks and no size.

the Radeon WX? what number , non stated. gaming?
wx2100 to 9100 , the latter uses 240watt all by it self.
A Nvidia, GTX1050 is 72watts, and runs any game and by far less cash !@!

memory. ddr3 is 15 to 32watts 4 or 8 sticks)

did you know some GPU cards use 300 watts alone?
the GPU card choice it totally based on your gaming needs, im sure you are not doing engineering simulations on this PC, nor video rendering work so is a gaming box. (after all you design any PC for worst case needs)


so question one is. watts peak
is as follows.
Asus does not spec out its power usage
only says you need 450watts or more.
this is based on 200 watts for 2 CPU.
so the mobo spec, is 250,
It say max on the mobo (chipset - cpu') 100 watts
so here is my tally.
mobo 100w
copu 100 (x2)200 (95 actual)
9100Wx, 250watts (roundedup) (at 550w) so far.
memory 32watts 8 sticks. were at 600 watts easy.
so we go a tad bigger, for margin of error reasons or bad luck. (add 100w) or 700 watts PSU. (q1 answered)
The total build tells me the power needs, and is not stated, only facts like that can one give good advice.
sorry if this is not accurate, but I did show my math.

the OS you run will be what apps you run
none stated
no jobs stated, tasks, purpose, or anything clear.
sorry but that is all I can do with vague inputs.

in linux, use nano editor
make full report of needs, then paste it here.
no need to use cell phone ever to type here on complex topics. ok?

If Raid is broken then logical drive will fail & will result in data loss.
enter into Smart Array Controller bios by pressing F8 & Recreate Raid 1 by selecting two working drives.

NO monitor told at all. nor any PC at all model told some kind of desktop sure, in photo above, but what/? NO TOLD
NO OS told ether and newer OS does not run on N_force chipsets.
that error is pure NVIDIA software for GPU same.
my wild guess
is COIN cell battery dead
and bios now lost 128bits of config data out of NVRAM CMOS>
and goes berserk as all do like that.
and the bits that control BIOS RAID ARRAY are gone ,lost
so it lies to you now (expected). thinking RAID is lost but was never ever used or enabled by you ever. BINGO CHAOS , BINGO FOR COIN
easy no? easy peasy lemon squeezy (new coin day)

MediaShield Rom BIOS 9.83 Copyright © 2007 nvidia corp detecting arrays..(means RAID drive system a HW option in this chip set)
it's a feature on vast PC and for sure business workstations and real servers. hw.

NO PC told so i fact I can know how old the PC is.
nor that dead coin cell at 5 to 7 years old and ignored that long.

1. a new coin fitted first.
2. reset bios inside bios
3. turn off RAID (yeah)
4. set time and date
5. set boot order to HDD0 first.
6. save key bios.
7. exit bios

cold boot now cured/ fixed.
my wild guess a super old desktop, with DOA/EOL Nforce chip set that has no support at all now, and coin cell is dead.
and for sure is Nforce there (AMD chip set , now fully EOL)
the raid hot key is f10 , given to emachine bios makers for Nvidia Nforce relic RAID chip.
next time tell what PC this is and get faster, shorter and 10x more accurate answers.

The other answer is no hackers it is you not knowing what RAID means and not servicing the COIN cell before it fails.
RAID if enabled has 2 purposes
makes 2 drives or more, run super fast,than just 1.
or my RAID 6 mode to run 8 drives and 2 can fail and no data loss at all and runs perfectly (tad slower) "called production mode by geeks"
production means never goes down like servers use so well..
that is it lacking PC model.

now the reverse of all that
Say it was raid
the rules are so raid common,
he bios or raid F10 setups must show a RAID array there.
or you make one now.
the set setup a RAID now, There. say RAID 1 or ?
then save and cold boot and install the OS to the virtual drive raid0
if before the raid was working F10 into raid and enable it again after new coin cell and safe exit F10
and now set boot order to RAID ARRAY 0 OR AS IT WAS BEFORE THE LOSS.

(COMMON POST ON TOPIC)
You do not have the bios set correctly for the installer to sense it is available for use. Enable raid mode in bios setup. nForce Drivers WILL install the MediaSheild software!!!!!!!!!! The sata hdd's must also be configured into a NVidia Stripe at least using the bios sata/raid config. tool(F10 on my board) then nForce driver install should offer it up. I have no problems installing or removing EVEN ON MediaSheild from Dualboot XP-SP2 X86 or Vista x86.

When you restored to factory setting you have reset the RAID configuration & probably lost all the data

2 drives indicates they are RAID 1, which are mirrored. 2 x 36GB = 36GB. This is an industry standard config. If you make any changes you will lose the array making it RAID 0 (no RAID - no longer hot swap), and or the complete loss of OS / data.

Instead make another logical drive for data storage. You need three or four drives to set up as RAID 5, again an industry standard config.

Make sure to back up in all instances. GL

RAID is only to protect data in case of hard drive failure. Data is only recoverable from backup.

However, if you have a separate arrays for the OS and data. Meaning two arrays, you can swap arrays onto an identical server with same array configuration. Drive positions (bay /slot) are critical.

if you have the RAID 0+1 or 1 ,beacause of the mirroring ,2 disk will be the same.you should be attention ,if you transfer data on the first disk,you must boot your server with that disk.when the system boot completely then you put the second disk ,beacause of the Raid 0+1 or 1 the data of the first disk automatically write on the second disk.

your HDD is not configured