I have a Denon AVR-2802 that has suddenly stopped playing audio. I'm also using the unit to switch video sources to the monitor, and the video works great. Also the audio circuitry is still able to detect whether it's getting the 5+1 digital signal from my DVD or the analog stereo signal from the cable box; just can't hear any audio.

try to reset. Unplug the unit, press and hold speaker A and speaker B buttons and plug the unit in outlet. If doesn't help, the unit may have a problem with microprocessor or dsp boad and need to be serviced at a repair shop.

mini 3.5mm to rca adapter is very simple adapter available most anywhere its headphone to red-white and works very well and only cost 5$ or so ok:)

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Denon-AVR-2802-Receivers-manual/id/363bh830/t/2/

Is it silent for ALL inputs including the Test Tones?

Page 33

Function incorrect, Muting, Tape or EXT Input on when it shouldn

Actually, Denon used a thermal fuse in the primary of the power transformer. Have a tech check the primary winding and see if it's open. if so , have it bypassed

Try doing a factory reset by turning off main power switch.hold down speaker a and b buttons while turning on main power switch ,display will flash 3 time s then release buttons,this then returns unit to factory default settings.

After connecting the Wii cables, connect a video cable to the "monitor out" connection to a compatible input on the TV.

hi there, i don't have a solution unfortuantely, but i may have the same problem. I have a denon 2802 av receiver, i bought it second hand and I can't seem to get the component video in / out working. Are you supposed to just plug it in and it works? Because I can't find any buttons or settings to select component in / out as my input / output sources?

Seems to be a heat related issue, when it " cools down " awhile it resumes audio output? Be sure you are allowing air circulation around the receiver, I am note sure but I do not think Denons have inboard fans, you could try a ciculating air fan on the unit after playing it for a couple of hours if the receiver feels hot.

muting is on switch off muting.
---volume control is in low level------turn volume up.
------input signal of audio source not selected------select your audio source.

If DIGITAL sign blink, this mean DSP board is defective. It will cut the sound on the AMP section. DSp is maybe defective.