Whirlpool Duet Sport WFW8300SW 3.4 cu. ft. Front Load Washer Logo

Related Topics:

Don Prall Posted on Sep 30, 2013

Whirlpool duet sport 8300 error code r25 Anybody

Whirlpool duet sport 8300 error code r25 Anybody know what this code is. DP

  • Don Prall Sep 30, 2013


    Sorry the error code is f25 not r25.

×

3 Related Answers

Anonymous

  • 2 Answers
  • Posted on May 13, 2008

SOURCE: whirlpool duet sport

5d is: suds lock (overdose of detergent dectected during the wash cycle).

Chances are you just put too much detergent in, or maybe the wrong detergent - make sure you're using the HE detergent.

These codes and more details are printed on the service technician diagnostic manual that is affixed to the inside of the washer's front panel.

Unplug your washer, and unscrew the three 1/4" socket screws at the bottom of the washer. The manual should be taped to the back of the panel, and the code and some recommended procedures will be right inside.

Ad

Anonymous

  • 2 Answers
  • Posted on Jul 28, 2008

SOURCE: whirlpool duet washer sport ht - error codes

FYI: The pump cleanout is located on the front of the machine, bottom right corner. There are only three screws holding the bottom cover on. It is easy to get to if you prop it up a few inches off the ground. Just thought this would be helpful as I just did this as of 5 min ago. Should take 10 min. or less.

aborcass

Ron Coons

  • 2651 Answers
  • Posted on Mar 12, 2009

SOURCE: whirlpool duet sport. I am getting a f33 error code.

i would look for a small blak rubber tube running frim the pressureswitch tothe back ofthe tub, its possible that the tubing if either clogged or ripped, and is not able to detect current water level inthe machin causingthe F33. 3 screws from across theback will release the main top, from thereyou an locate the hose back right corner i believe

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Duet sport wfw8300sw03

try unplugging and plugging back in. a reboot of sorts.

i am not a repair man, but I own one too. good luck.
1helpful
1answer

How do I clear error code F-28 on my Whirlpool Duet Sport electric dryer?

The tech sheet is located under the kick /service panel in a jacket. Suggetions and codes are in it. Duet sport service manual

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

0helpful
1answer

Whirlpool Duet Sport Model WFW8300SW0 basket won't

The following list of codes indicates an electronics communication problem with the washer: - Duet HT washer - F01, F03, F06, F11, F23, F24, F27, F28, F29, F30, F31, F32, F35, F42, F61, F62, F63, F64, F65, F70, F71, and F99

If Pause/Cancel does not work:
  1. Unplug washer or disconnect power for one minute.
  2. Plug in washer or reconnect power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, call for service.

I would first replace the door latch/lock assembly, a number of users have and it fixed the F-11 error code completely. Its the cheapest part for this problem.

Hope helps.
0helpful
1answer

F-02 error code on whirlpool front loader duet

http://www.fixya.com/support/r3574284-checking_the_drain_pump_on_a_front_loader
2helpful
2answers

Whirlpool dryer duet sport MOD WED8300SW error message

I have a whirlpool duet sport electric dryer with an error code of F 26.
Mar 02, 2010 • Dryers
0helpful
1answer

Whirlpool Duet Sport ~ E28 Error Code

serial communication error between central control and motor control.
Check connections at ccu (top front right corner) and mcu (bottom by motor), check belt drive for wear.
Did motor run ? Any other codes in diagnostic? (any one modifier button 4 sec on 4 secs off 5 times.) F codes are failures and C codes are portions of test cycle(automaticly run)
6helpful
2answers

Whirlpool Duet Sport Error Codes?

My machine had the F21 code and the inlet to the pump was blocked with change, bobby pins, small rocks, pieces of fuzz and clothing. Removed the front cover of the mahine and removed the cap on the front side of the pump and cleaned this trap area out. The pump motor quit humming and the machine worked like it is supposed to!

Thanks
Not finding what you are looking for?

118 views

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...