Recently, our Saeco Vienna Superautomatica has started only dispensing 1/2 of a cup (same size cup, same setting on the rotary dial). The machine is about 3 years old and has worked well until recently. We only use our water from a Rev. Osmosis system. I opened up the machine and looked inside. The water lines all looked good - I saw no mineral buildup. I checked as much as I could and everything looked OK. We actually take the brew group out and rinse it daily. I took it apart (not entirely) and cleaned it as well. Everything still works, but still only 1/2 a cup. I have thought about replacing the Flow Meter as that seems a logical next 'guess'. Oh, yes, changing the dial on the front seems to have little effect unless I turn it to a smaller amount and that seems to dispense a little less coffee, although it is not that noticeable. Any suggestions? Thanks!
The trouble is the pipe that goes to the water tank follow it its hook to a white plastic sensor go in that piece and come out that the level sensor that broken that the first thing and most likely broken if not the circuit board
402 views
Usually answered in minutes!
×