My Stove burners and broiler comes on with no problem. But when I turn on the oven it only gets warm and never reaches the desired temperature.
Good Afternoon Tasha - There could be
a number of any one of several underlying causes in why the oven is
experiencing this particular issue:
·
Convection
heating element
·
Thermal cutout
·
Thermal oven
sensor
·
EOC
(electronic oven control)
·
Ignitor
·
Bake or broil
element
·
All wired
connections
The parts above will need to be assessed for further
evaluation. Lastly, the oven cavity and insulation should be checked to ensure
there are no gaps or damages that will leak out the heat. At t his time, I
would recommend contacting a professional to assist you further since it is always
a good idea to get the appropriate diagnosis prior to making any unnecessary
part replacements.
SOURCE: I have a gas stove - Frigidaire model FGF326ASA.
You probably have a weak ignitor. To operate properly it should draw 3.5 amps or better. The ignitor must be bright. If it is dim it is weak.
Some repair pix
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Testimonial: "Thanks for the help, much appreciated. Ignitor was coming on but not pulling full amperage. Am going to replace ignitor."
SOURCE: My gas oven (Frigidaire Gallery)
Most probable cause is a weak bake burner ignitor,if you can remove the floor of the oven and see a orange glow but within one minute thier is no flame the ignitor that glows is weak and needs to be replaced,if no glow at all ,if your capable find the 2 wires to the bake ignitor,using a volt meter set to AC volts there should be 120vac to the ignitor. If their is 120 vac and absolutly no glow the ignitor is cracked and needs to be replaced,if their is not 120 vac it could be the gas safety valve or control
Testimonial: "I didn't expect a response from anyone; pleasantly surprised that I received a helpful reply!"
153 views
Usually answered in minutes!
×