My wii fit balance board says to step off and press A

You need to sync the balance board with the Wii. It's easy to do and takes 10 seconds.

1) Start Wii Fit.
2) When it asks you to push the power button as you're describing, open the SD card slot on the front of the Wii and observe the red button.


3) Now, flip over the balance board. Remove the battery cover on the bottom of it, and press the red button beside the batteries, and the blue light should start to blink.


4) While the blue light on the balance board is still blinking, quickly press the red button on the Wii. If they are both blinking at the same time, they should be syncing to each other.

5) Your Wii Fit Balance Board should now be synced with your Wii! If it has been synced successfully, you will no longer need to sync it, and should now automatically connect when the button is pressed with your foot.

1. Insert a Wii Balance Board compatible game disc in the Wii console.

2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

3. Open the small SD Card slot cover on the front of the Wii console.

4. Remove the Battery Cover on the bottom of the Wii Balance Board.

5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.

6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.

7. The blue light will stop blinking and stay on steady once the syncronization is complete

Try these steps!


1. Insert a Wii Balance Board compatible game disc in the Wii console.



2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.



3. Open the small SD Card slot cover on the front of the Wii console.



4. Remove the Battery Cover on the bottom of the Wii Balance Board.



5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.



6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.



7. The blue light will stop blinking and stay on steady once the syncronization is complete

click here to download repair guide if u need

1. Insert a Wii Balance Board compatible game disc in the Wii console.



2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.



3. Open the small SD Card slot cover on the front of the Wii console.



4. Remove the Battery Cover on the bottom of the Wii Balance Board.



5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.



6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.



7. The blue light will stop blinking and stay on steady once the syncronization is complete.

click here to download repair guide if u want

Have new crown compatible fitness board, new batteries inserted, inserted Wii fitness disc, choose training, then trial, choose hula hoop game, used remote press A to start.

Screen says place me on a flat floor and press POWER button before stepping onto me

Followed the instructions power button flashes blue, as do the four corners then the lights go out - then nothing happening, still have the same message place flat on floor etc....

Have also tried the Wii Balance Board Check - followed all instructions last one says please turn on power. Pressed button flashes blue as do four corners then they go out

Am I doing something wrong or Is this a faulty board ?

Thanks

follow this

1. Insert a Wii Balance Board compatible game disc in the Wii console.
   
   
   
2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.
   
   
3. Open the small SD Card slot cover on the front of the Wii console.
   
   
4. Remove the Battery Cover on the bottom of the Wii Balance Board.
   
   
5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
   
   
6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
   
   
7. The blue light will stop blinking and stay on steady once the syncronization is complete.

there are series of problem in wii which can be solved without much technical knowledge ........ your problem belong to that so dont worry i will give you the link to download the wii repair guide that will help you a lot Click Here

Hope this helps

Try these steps!


1. Insert a Wii Balance Board compatible game disc in the Wii console.


2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.


3. Open the small SD Card slot cover on the front of the Wii console.
4. Remove the Battery Cover on the bottom of the Wii Balance Board.
5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
7. The blue light will stop blinking and stay on steady once the synchronization is complete.

please leave a good rating and testimonial if you appreciate my help. THNX

Hello,

Try these steps!


1. Insert a Wii Balance Board compatible game disc in the Wii console.


2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.


3. Open the small SD Card slot cover on the front of the Wii console.
4. Remove the Battery Cover on the bottom of the Wii Balance Board.
5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
7. The blue light will stop blinking and stay on steady once the syncronization is complete.

Fore more detailed information (including pictures) on how to sync the Wii Balance Board, click here.

If you are still unable to sync your Wii Balance Board, please call 1-800-255-3700 so that they may assist you further.

Hope it helped.

Try these steps!


1. Insert a Wii Balance Board compatible game disc in the Wii console.


2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.


3. Open the small SD Card slot cover on the front of the Wii console.
4. Remove the Battery Cover on the bottom of the Wii Balance Board.
5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
7. The blue light will stop blinking and stay on steady once the syncronization is complete.