Dirt devil easy steamer

SOURCE: Dirt Devil Easy Steamer Deluxe

Follow the plastic extension that runs from the trigger through the length of the handle. This requires more disassembly that at just the trigger. At the end of the plastic extension you will find a triangular-shaped "ramp" that pushes against a "button" plunger that opens the valve that releases solution. When you release the trigger, the triangular ramp retreats and the plunger is supposed to be pushed back out by an internal spring in the valve. This plunger sticks because of accumulated soap from evaporated solution. Try cleaning that valve and plunger by running clean, hot water through the system OR replace the valve. In the future ALWAYS thoroughly flush the system with hot, clean water after using the machine.

SOURCE: dirt devil easy steamer need directions to use

Thank you for responding to my question. I should have spent some time really looking at my little machine. It wasn't hard to figure out -once I found and read the back of the cleaning solution bottle and tried my luck following the water to cleaner ratio.. Opening, adding the cleaning solution and water and re-closing the reservoir was pretty easy. Everything worked out fine...and my carpet is...spotless. Thank you, Cmarie

SOURCE: dirt devil en vision

download manual here

http://www.dirtdevil.com/CustomerService/Manuals/

SOURCE: I need a new manual for dirt devil easy steamer deluxe

CLICK HERE for the owners manual in PDF format.

Thanks for using FixYa - a Very Helpful rating is appreciated for answering your FREE question.

SOURCE: I lost the manual for my Dirt Devil Easy Steamer

You can get it here.

http://www.dirtdevil.com/search.aspx?q=MCE7000&type=3

Right click and download the file.

Then open it with Adobe Reader or FoxIt Reader. I just got one!