Remove battrey from tc110

Hi,

Please remove battery and place the + and - side according to the battery-located instructions or symbols provided. If the tablet does not work after that, please use a different pair of batteries to attempt to turn on the tablet.

Thank you.

Check that it works on a windows PC.
I suspect t was removed before it was properly closed down.

Windows will give you the option of scanning and repairing the SD card.

Use "show hidden icons" icon in taskbar on the right hand side of the PC to show how to release an USB item properly.

See if you can remove the battery out for 1 minute. Put it back and try to turn on your phone. See if it will boot.

If that does not work, please remove the battery out and put it back in right away. Then press and HOLD Volume Down and Power buttons at the same time for 10 seconds. See if it will turn on and work normally or you will see the Recovery Menu.

Is your battery removable? Try removing the battery and then plugging in the tablet. If the tablet runs on only the AC power, then your battery is shot.

You are likely running an old version of the firmware / ROM. See if Samsung has a new version, or if you are comfortable with rooting visit XDA Developers forums to learn how to get a newer version with more up to date power management and battery conditioning updates.

Connection on tablet from charger to battery is not being made and that is why it is not charging in one unit but charging in other. Till problem is resolved charge battery in other working unit.

remove the battrey and connect it again.
Hope this helps. Please rate my response.
Thanks.
Have a good day

Try power draining your computer first. remove battery and ac adapter, then press and hold power button for 15-20 sec. Expect no response since there is no power source. After that, try if pc will now turn on. If it still wont, possibly it will be needing a motherboard replacement.

You need to separate the motherboard from the back of the touchscreen.Don't try to totally disassemble it, just get it to where you can remove the board with the battery.Then you can carefully remove the small board with the battery.