The plastic deliming tool won't go in my bunn coffee maker. Doo I need to angle it or what/
Take the 2 screws out underneath where the hole is. the part will pop off and reveal the tube. thats what i had to do. hope this helped.
FYI, also.... the hose/tube was never clogged on mine. when i opened up the coffee maker, it was completely clear. I firgured out that the hose was lose. (not completely detached), but just pulled away a little...enough to let air in and so it wasn't drawing right. kinda like when you have a hole in a straw. it won't work. Anyway, I sealed it better. no big deal....and it works absolutely perfect again.
FYI, also.... the hose/tube was never clogged on mine. when i opened up the coffee maker, it was completely clear. I firgured out that the hose was lose. (not completely detached), but just pulled away a little...enough to let air in and so it wasn't drawing right. kinda like when you have a hole in a straw. it won't work. Anyway, I sealed it better. no big deal....and it works absolutely perfect again.
.
×
Try keeping pressure on it, and turn it around as you insert it. You are trying to go around a corner in the tubr, and sometimes it is hard to get it to go around the bend.
FYI, also.... the hose/tube was never clogged on mine. when i opened up the coffee maker, it was completely clear. I firgured out that the hose was lose. (not completely detached), but just pulled away a little...enough to let air in and so it wasn't drawing right. kinda like when you have a hole in a straw. it won't work. Anyway, I sealed it better. no big deal....and it works absolutely perfect again.
.
×
1,714 views
Usually answered in minutes!
×