Unable to turn on Jabra VBT 2050

Please review this guide for connecting a bluetooth headset to a PS3:
(Click here)
http://boardsus.playstation.com/playstation/board/message?message.uid=26900460

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks......

Try 0000..that should work..

I have a Jabra VBT 2050 bluetooth headset. As per the product user manual(page 8) this device is compatible with any bluetooth mobile phones with bluetooth version 1.1 or higher.

My LG Shine CU720 mobile phone is not able to detect the VBT 2050 device. I checked the specification of mobile phone & its bluetooth 1.2. I am able to pair the VBT 2050 with other bluetooth mobile devices.

Could you help me resolve my problem. Appreciate quick help

You should have up to 4 hrs talk time, and 180 hrs of standby.

Make sure you charge the 2050 until the l.e.d. turns off. As long as the light is on, its still charging.

If you did that, I would return the unit for exchange, your may have a defective battery.

Hold the volume up (+) button down along with the call button for 5-10 seconds (until the led lis solid). Then, while the led is lit up, initiate the pairing on your phone. It should pair this time. It worked for my phone, which was having the same problem you described.

o.k. when its on charge is there a light on? after complete charge the light is suppose to go off. to get it to go on again push the call button till the light does come on. at least 6 seconds and than take it from there, its suppose to go on and blink. discover mode is solid light. pass key is 0000 or 1234. dont give up its a neat machine and it just takes a little patience.good luck

try holding call button down for 10 seconds on that one, it shold start blinking, than remove your thumb as soon as it starts blinking, to turn it off reverse the process, remember passkey is 0000 or 1234. good luck

OK, this is what you do: 1. Make sure your Jabra VBT 2050 is fully charged. 2. Enable bluetooth on your phone. 3. Turn on your VBT 2050 with the little button on the side (the white light between the keys should flash). 4. Initiate a search from your phone while holding down the center button on the VBT 2050 (middle, under the + and -). 5. You might need to do another bluetooth search using your phone (it took me about 4 times befor my Blackberry Storm picked up the signal. 6. When your phone asks for a code, type in 0000 (the default number).

the standard pass key for the jabra vbt 2050 is 0000.
it worked for mine

I took my husband's suggestion and used 0000 and it worked. My husband claims it is the factory default for all bluetooth headsets. Try it and let us know if it works.