Why is my gr- df550 vidio camera stuck in safe mode and when I removed the battery it didn't work, also
tape wont eject and view the finder wont come in focus.
Mine is in safe mode 3 too and it won't go away. It's over a year old and not worth $$$ to fix. It's time to move up to a HD hard drive video. I suggest you too.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
i HAVE A JVC GR-D820EK MINI DV AND IT IS DISPLAYING UNIT IN SAFEGUARD MODE 06, I HAVE TRIED REMOVING BATTERY AND DC PLUG BUT NOTHING HAPPENS IT WILL NOT WORK ON EITHER PLAY OR RECORD, PLEASE COULD YOU ADVISE
Hi,, try to put the camera in vcr mode and press rewind button and fast foward alternately until the tape start to move then press eject few time
if its not a big mechanism problem you may be able to ejected if not that will have to be made manually
by removing the cover and look where the tape is hook in the mechanism ;i sugest to you to call a
good technician
hope that will help you.
Poor contact of drum motor connection(flexi found at the upper part of the drum assy). Solution, disconnect this wire from the connector and cut 1mm from the end so that it will make a new contact. WIre will be shortened a little bit but it still can work this way since this flexi can not be ordered alone, it comes complete with the whole drum assy. Good Luck
thats a hardware problem .u must to open that camera and remove mechanisum u can c there is a small board behind that mechanisum .remove that board and c there is rubeer which connec to caption motor . that u put right condition than it will work
I have this same problem but the cassette tray will not go in. Error 1 "safe mode". I jiggled the mechanism beside the rubber "guide" ( in the middle above the drum) and it works now!! It must be some sort of sensor??
×