Need codes for philips universal remote on a toshiba TV

http://units.osu.edu/cable_tv/instructions/html/remotecodes.html

Hello,

Here is a link to the page with the Users Manual for that remote control. It will have all codes and instructions in there.

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=US&slg=AEN&sct=AV_REMOTE_CONTROLS_SU&cat=HOME_AUDIO_VIDEO_ACCESSORIES_CA&session=20090530030212_71.142.197.50&grp=HOME_ENTERTAINMENT_GR&ctn=US2-PH301S&ds=US2-PH301S&mid=Link_UserManuals&hlt=Link_UserManuals

I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/

I have a Durabrand TV and a Phillips universal remote... does any one know what codes i can use???

philips.com/codes

Go to www.remotecentral.com for a complete (well almost complete) list of universal codes for Philips.

Vincent Bova
www.totalcontrolremotes.com
Programming Remotes & Advanced Control Systems

obtain the model number for your TV and contact www.remotes.com

I have the remote control but i need the code to add in my toshiba tv

http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

0463