Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White Logo
Posted on Oct 30, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

What does err F1 mean? - Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White

1 Answer

  • Official Brand Answer 4,342 Answers
  • Posted on Nov 02, 2012
Electrolux
Official Brand Answer
Level 0:

Joined: Mar 24, 2011
Answers
4342
Questions
0
Helped
1467945
Points
5907

Hello - Typically error code F1 could indicate a variety of issues. The range could possibly have a runaway temp (higher than normal temps), shorted keypad, faulty EOC (Electronic Oven Control) or, display wire harness missing/not connected. Usually, this code means to replace the EOC. You may be able to reset the range by disconnecting the power to the unit for up ten minutes. Usually this will clear most false error codes. You can disconnect power by either unplugging the unit or flipping the circuit breaker off and back on. If resetting the unit proves to be ineffective, I would recommend contacting a professional to move forward accurately.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What does F1 mean on Gibson gas self cleaning oven

The code F1 Gibson gas self-cleaning oven means
Oven Control Failure. You need to go through the manual
And check for possible solutions if you are getting an f1 error.
Dec 01, 2020 • Ovens
1helpful
1answer

What does E2 -F 1- mean?

A E1-F1 or E1-F2 is a faulty touchpad.
FixYourBoard.com has replacements about for NLA ovens.

They come with a two year warranty.
Reach out to us at 512-355-1108 or [email protected]
e1-f2 error-undefined-undefined-0.jpeg

ledgestone touchpad-undefined-undefined-2.jpg
0helpful
1answer

F1 ERR message on EOB

What is the make of your oven?
Dec 29, 2011 • Ovens
0helpful
1answer

The oven beeps and has a error F1

Hello,F1 means Stuck touch pad.
Usually means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be canceled,replace the oven control(also called clock or ERC),touch pad,or both.

Thanks



1helpful
1answer

THE OVEN DOESN'T WORK...F1 ERR

You need to replace the clock control
May 20, 2010 • Ovens
1helpful
1answer

My stainless frigidaire professional series electric stove oven door is locked...i did not self clean it, but it is locked somehow...if i hold either the lock button, or the clear/off button for 15 seconds...

F1 is an EOC (electronic oven control) failure. The control is expensive. But before you go and buy this board, you need to find a diagram to see of this model oven lock is controlled by the EOC or by a micro switch. If you have a lock button on the board the you have to replace the EOC.
4helpful
1answer

My oven door locked itself. It will not let me use the keypad.

The F1 code means the ERC or the touchpad is bad.
F1 fault code generally implies that the electronic oven control has detected an internal malfunction. Most likely the cause is a shorted keypad which would require a new electronic control board. The electronic control board internal checksum may have been corrupted which also would require a new electronic control board. The control also may have sensed a potential runaway oven condition. The control may have a shorted relay, RTD sensor probe may have gone bad. The RTD is the oven temperature sensor probe which needs to be ohmed and the resistance should be 500 ohms or more at room temperature. If the resistance is less than 500 ohms, replace the oven sensor. Normally a technician is needed to make this check.
I recommend calling a service technician to diagnose and repair your oven.

2helpful
2answers

"F1" DISPLAYED AND BEEPING

hi there,

the F1 code usually means that you have a key stuck on the keypad. unplugging it from power won't make a difference for this one. is it a wall oven or a stove? can you supply the make & model please?
Oct 03, 2008 • Ovens
Not finding what you are looking for?

134 views

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Carew

Level 3 Expert

3808 Answers

Kell Le

Level 1 Expert

6 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...