I have a new door for my Kitchaid microwave. I have the case open but don't see how to remove/replace the door. The hinge pins and receiving holes do not seem to be removeable?
If you or a friend decide to work on it, we have *critical* safety and disassembly info at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk You can find helpful exploded view diagrams and order parts by entering your base model number (without the suffix) here: http://tinyurl.com/gv383 On exploded view diagram 4, look at reference part number 4. That is the choke cover. It's held in place with hidden tabs. I've attached a diagram from a Sharp model that will be somewhat similar. Once the choke cover's off, the hardware should be visible. The diagrams do not show the hinged at all. That may mean they're welded to the chassis of the oven. Write back if this does not clear it up.
194 views
Usually answered in minutes!
I have a KitchenAid KCMS185JSS and have the same problem. I have a new entire door assembly but cannot get the old door off of the hinges, please help, Thanks.
×