Zebion pci sound card driver

Windows XP should load drivers for the card automaticly, you may want to upgrade you system to SP3 if you havent already, Go in BIOS before start up and uninstall your onboard Audio driver under Onboard Periferals, click disable/turn it off, If you have an XP instulation cd you may be able to point windows to the Legacy driver.

Creative Labs audio drivers are available from their WEB downloadsite - click on this link and select your model sound card to download : -
http://support.creative.com/

make sure the card is plugged in properly...also make sure you have installed the latest service pack for xp64 bit...because it requires the latest service pack to be installed on the system, only then the sound card will get detected...

for xp 32 bit edition... at least sp2 with Microsoft UAA driver update for sound card must be installed in your computer...

Here you go. Please make sure this is the correct driver for your operating system

http://support.creative.com/Products/ProductDetails.aspx?catID=1&subCatID=207&prodID=1864&prodName=Sound%20Blaster%20PCI%20128&subCatName=Others&CatName=Sound+Blaster

Regards
Zahc

HERE is the download location.

Release date : 2 Jul 09 This download is a driver providing Microsoft® Windows® 7 and Windows Vista® support for Creative Sound Blaster® Live!® and Audigy® series of audio devices

File Name : SB24_PCDRV_LB_1_04_0090.exe This download is a driver providing Microsoft® Windows® 7 and Windows Vista® support for Creative Sound Blaster® Live!® and Audigy® series of audio devices. For more details, read the rest of this web release note.
This download supports the following audio devices only:

• Sound Blaster Live! 24-bit
• Sound Blaster Audigy Value/SE/LS
• Sound Blaster 5.1 VX

Requirements:

• Microsoft Windows 7 64-bit, Windows 7 32-bit, Windows Vista 64-bit with Service Pack 1 (SP1) or Windows Vista 32-bit with SP1
• Sound Blaster audio devices listed above

Notes:

• This driver is only for the Creative Sound Blaster audio device listed above.
  DO NOT install this driver for other Sound Blaster audio devices.
• To install this driver
  1. Download the file onto your local hard disk.
  2. Close all other Windows applications.
  3. Double-click the downloaded file.
  4. Follow the instructions on the screen.

if you have a boot disk try with that.. select the path as cd drive..

there is a driver for sound card which should be installed,ur comp engineer normally has it ready with him, once the souncard driver is installed all ur audio's will work..

Hi Rana,

Assuming you're running Windows XP or 2000, you can download the PCI 128 Sound Card Driver Installation programs here:

http://support.creative.com/downloads/download.aspx?nDownloadId=255. (They are free of charge, of course).

When you launch the program, it detects your operating system information and automatically installs the appropriate drivers.

If you're running something other than Windows XP or 2000, go here: http://support.creative.com/Downloads/searchdownloads.aspx to find additional driver installation packages.

Hope this helps, and enjoy the sound and music!

Gail :-)

CM9880/8CH Azalia Audio CODEC onboard (found on ASUS boards) - basic microsoft UAA function driver installed by Vista works but misses soundinput. Install latest ASUS/C-Media software (set compatibility mode to XP for the installer) > reboot > set multiple streams enabled > switch input from microphone to wave and back > reboot

Creative Audigy (standard) -- No built-in support, but it works with beta drivers from Creative's site.

Creative Audigy 2 ZS Platinum / Pro -- [http://us.creative.com/support/downloads/download.asp?sOSName=Windows+Vista+32-bit&region=1&Product_Name=Audigy+2+ZS+Platinum&Product_ID=9107&modelnumber=&driverlang=1033&OS=26&drivertype=0&Image4.x=38&Image4.y=15 * Creative SoundBlaster Live! Series. Works with special drivers found here http://www.ngohq.com/home.php?page=Files&go=cat&dwn_cat_id=20 (32 Bit)

Creative SounBlaster 2 Platinum Vista beta drivers found on www.creative.com

ECHO AUDIO - INDIGO DJ - OK but with strange routing in virtual outputs

Intel 8x0 AC97 (32 bit)

MSI Neo4 SLI Onboard Sound (CL 7.1) - Version: 5.12.1.506, (32 Bit)

nForce4 sound card - Version: 4.64, (32 Bit)

nForce3 (Realtek ALC850) - drivers obtained from windows update. (32 Bit)

Terratec 5.1 Fun PCI - sound works, controlpanel doesn´t work (32bit)

Terratec DMX 6Fire

SoundMAX Integrated Digital Audio (Tested with ASUS P4S800 Motherboard) - Needs latest drivers available to work correctly, otherwise install chipset drivers for AGP and IDE. Sound may skip and studder if not using the latest driver

anonymoose

It sounds like a software problem. Though you did the right thing by entering the bios & disabling the onboard sound. That should have been enough. Did you uninstall the old intergrated sound drivers before adding the 24bit card? Just about all the drivers & upgrades for your 4600 through Dell is Creative software & thats why your having a tough time. I would put everything back to how it was. Re-enable the intergrated sound & reboot! Run system restore & check that every thing is running right!! Look at this dell web site for the sound drivers you have at this link:
http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=DIM_P4_4600&os=WW1&osl=en&catid=&impid=
If you must, install a upgrade for your intergrated sound. Just so you can uninstall it after a reboot. Re disable the sound in the bios. Do not install your new card yet. While back in windows device manager you should be missing a PCI device. Shut down install the new sound card. Hopefully windows will want the drivers & all runs fine. If still no it could be a bad card (i know what your thinking but it's possible). The only thing left is the regestry is using the wrong PCI device.