I have a universal remote now and it doesn't remove passcode from screen it only turns off and on. Need help to enter than remove passcode
SOURCE: I lost my original remote for rca sdtv 27
www.remote.com not only has factory replacements they have univesals that have been proven to wrok so I would check them out you be glad you did, thanks
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620
SOURCE: can't get the tv set to video input mode
You may be able to press the channel down button, past channel 1 to the av inputs.
It works on some tvs, but not all.
SOURCE: Tv is not working it is stuck on channel 3 and
Hello
If you have its original remote control you can unlock its parential settings and reset it. Then only you can watch other channels also. I'm ver sorry to say that if you lost your TVs remote control, you will be unable to unlock it. Try to get a remote from any of your friends who owns the same model number RCA TV. If you are able to get it, do the following with that remote, and reset the V-chip. Try to purchase one new remote control from RCA.
Most RCA and GE TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
OK
Happy New Year
SOURCE: I have a TruFlat RCA
Try this -
Regards,
Tony
59 views
Usually answered in minutes!
×