Singer 2732 I have had the singer 2732 for a couple of years and am just now really using it. It has never really worked great and now when i sew it sounds like the needle is hitting something so i took the plate off and the bobbin out and when i manually move the needle it is hitting the metal thing that turns underneathe the bobbin! I am ready to throw it out. Could it be the timing and how can i fix this? Hopefully without bringing it in.

SOURCE: singer 5817c

Hi, actually I can help with your problem but maybe you can help me with mine. A friend gave me the same model...without the instructions. Would you be willing to give me a pdf scan or photocopy of the manual, please? Let me know at [email protected]. Thanks!

SOURCE: Singer Touch & Sew won't loop bobbin thread

I believe you have a broken gear. These are difficult to repair on your own.

SOURCE: singer quantum cxl sewing machine needle hitting metal

Your needle is probably to long or you need to open it more

SOURCE: I HAVE A SINGER SEWING MACHINE MODEL 2732 AND NEED

When threading your needle make sure you pull enough thread through...a good 4 inches will do..hold the end of the thread and turn your hand wheel by hand until needle comes back up...you should have a loop around your upper thread ...pull this loop out towards you..you should now have two threads..cut threads till about 2 inches and make sure you position threads through the center of your sewing foot and towards the back of your machine. Good Luck

SOURCE: Singer 8280 bobbin thread not taken up by needle

needle in backwards?